Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Expand
titleCourses


Competency Competency Requirements Upload RequirementsExamples


The required evidence will be one of the following:

      • Copy of email confirming course completion of Construct Safe Tier 1
      • Screenshot or website print-out confirming course completion / pass result of Construct Safe Tier 1
  • Evidence must show ConstructSafe website URL or email from @constructsafe.co.nz
  • Evidence must be valid and in date
  • Evidence must show ID number
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date= As shown on evidence

Expiry Date= Not required



The required evidence will be one of the following:


Issue Date= As shown on evidence

Expiry Date= Not required




Expand
titleHealth & Safety Certificates


Competency Competency Requirements Upload RequirementsExamples

Health & Safety.Course.Construct Safe Tier 1

The required evidence will be one of the following:

      • Copy of email confirming course completion of Construct Safe Tier 1
      • Screenshot or website print-out confirming course completion / pass result of Construct Safe Tier 1
  • Evidence must show ConstructSafe website URL or email from @constructsafe.co.nz
  • Evidence must be valid and in date
  • Evidence must show ID number
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date= As shown on evidence

Expiry Date= Not required


Health & Safety.Course.Health and Safety Representative

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Health and Safety Representative Initial or US 29315
      • NZQA Record of Achievement showing completion of the following unit standards 29315
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion or date of unit standard achieved must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy 

Issue Date= As shown on evidence

Expiry Date= Not required


Health & Safety.Course.Manual Handling

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Manual Handling
      • NZQA Record of Achievement showing completion of the following unit standards 17459
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion or date of unit standard achieved must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Where completion date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements

    • Downer Water and Downer Automation – 3 years from completion date
    • Downer Power
      • Role Vesta.Wind Farm – 2 year refresher from completion date
      • All other roles – Non-expiring
An additional certificate or competency card issued from a NZQA accredited training organisation showing Manual Handling MUST be provided 

Issue Date= Date of training completion

Expiry Date=

    • Downer Water and Downer Automation All Roles – 3 years from completion date
    • Downer Power Vesta.Wind Farm Role – 2 year refresher from completion date

All other roles – Non-expiring


Health & Safety.Course.Plant Isolation & Tagging (25043)

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Plant Isolation & Tagging or US 25043
      • NZQA Record of Achievement showing completion of the following unit standards 25043
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion or date of unit standard achieved must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
Where the evidence date exceeds 2 years on NZQA record of achievement, certificate or competency card, an additional certificate showing Plant Isolation & Tagging/US 25043 MUST be provided. 

Issue Date= Date of training completion

Expiry Date= 2 years from completion date


Health & Safety.Course.Site Safe Passport

The required evidence will be a SiteSafe card, screen shot or email from SiteSafe NZ showing any of the following:

    • Building Construction
    • Civil
    • Consultants
    • Passport Plus – height
    • Passport Plus – tools & Plants
    • Passport Plus – Worker Health & Passport Flexi
  • Expiry date must be visible and current
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

If completion date exceeds 2 years or it has expired, an additional refresher of SiteSafe card, screen shot or email from SiteSafe NZ showing either:

    • Building Construction
    • Civil
    • Consultants
    • Passport Plus – height
    • Passport Plus – tools & Plants
    • Passport Plus – Worker Health & Passport Flexi

MUST be provided

Issue Date= Not Required


Expiry Date= As shown on the evidence (2 years from issue date)


Health & Safety.Course.Site Safe Supervisor Passport

The required evidence will be a SiteSafe card, screen shot or email from SiteSafe NZ showing any of the following:

      • Supervisor
      • Accident & Investigation
      • Risk Management
      • Training & Supervising Workers
      • Leadership in Safety
      • Health & Safety in Construction
  • Expiry date must be visible and current
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

If completion date exceeds 2 years or it has expired, an additional refresher of SiteSafe card, screen shot or email from SiteSafe NZ showing either:

    • Supervisor
    • Accident & Investigation
    • Risk Management
    • Training & Supervising Workers
    • Leadership in Safety
    • Health & Safety in Construction
 MUST be provided

Issue Date= Not Required


Expiry Date= As shown on the evidence (2 years from issue date)


First Aid.Course.Transpower First Aid

The evidence will be a:

    • Certificate showing “Competency course for electrical workers’ or “Competency refresher course for electrical workers’ including Sections “Electrical Component” and “First Aid/CPR component
  • Issue and expiry date must be clear and visible
  • Where assessor / instructor sections are shown on the evidence, this must be completed
  • Certificate or competency card must be issued from a NZQA accredited training
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and
  • Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing “Competency course for electrical workers’ or “Competency refresher course for electrical workers’ including Sections “Electrical Component” and “First Aid/CPR component” MUST be provided

Issue Date= Course completion date


Expiry Date= 2 years from course completion date

Expand
titleLicences
ElectricalLicence.Registered with EWRB - Cable Jointer
    • Screen shot from the EWRB Website showing EWRB Cable Jointer Licence
    • EWRB cable jointer card
  • Must show completion date
  • Must have expiry date Date of training completion 2 year completion training Licence.Registered with EWRB - Electrician
    • Screen shot from the EWRB Website showing EWRB Electrician licence
    • EWRB Electrician card
  • Must show completion date
  • Must have valid expiry date
  • training 2 year from completion of training High Risk Work.Licence.PE Pipe Welding - Butt

    Competency Competency Requirements Upload RequirementsExamples

    Electrical.Licence.Registered with EWRB

    The required evidence will be one of the following:

      • Screen shot from the EWRB Website showing EWRB licence
      • EWRB card
  • Must show completion date
  • Must have valid expiry date
  • Hazardous Substances.Course.Certified Handler

    The required evidence will be one of the following:

        • Approved Handler Test Certificate - Certificate Number must be visible
        • Compliance Certificate, type Certified handler - Number must be visible
    • Issue and expiry date must be visible and current
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Must contain “hazardous Substance and New Organisms Act 1996”
    • Certificate or competency card must be issued from a NZQA accredited training
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date = Date of training completionWhere completion date exceeds 5 years or has expired, an additional refresher or course completion of either

        • Approved Handler Test Certificate - Certificate Number must be visible
        • Compliance Certificate, type Certified handler - Number must be visible
    MUST be provided

    Issue Date= As shown on certificate

    Expiry Date= 2 year  5 years from completion date of training issue


    Hazardous Substances.

    Course.Chlorine Gas Handler 6:1A

    The required evidence will be one of the following:

        • Approved Handler Test Certificate – Substances 6.1A Chlorine - Certificate Number must be visible
        • Compliance Certificate, Certification details “6.1A Chlorine” - Number must be visible
    • Issue and expiry date must be visible and current
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Must contain “hazardous Substance and New Organisms Act 1996”
    • Certificate or competency card must be issued from a NZQA accredited training
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    If completion date exceeds 5 years or has expired, an additional refresher or course completion of one of the following

        • Approved Handler Test Certificate – Substances 6.1A Chlorine - Certificate Number must be visible
        • Compliance Certificate, Certification details “6.1A Chlorine” - Number must be visible

    MUST be provided

    Issue Date=

     As shown on certificate

    Expiry Date=

    5 years from

    date of

    issue


    ElectricalHazardous Substances.Licence.Registered with EWRB - Electrical Service TechnicianCourse.Management & Handling of Hazardous Substances 31290 & 31293

    The required evidence will be one of the following:

      • Screen shot from the EWRB Website showing EWRB Electrical Service Technician licence
      • EWRB Electrical Service Technician card
    • Must show completion date
    • Must have valid expiry date
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Management and Handling of Hazardous Substances US 31290 & 31293
      • NZQA Record of Achievement showing completion the following unit standards 31290 & 31293
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Must contain “hazardous Substance and New Organisms Act 1996”
    • Certificate or competency card must be issued from a NZQA accredited training
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

    Management and Handling of Hazardous Substances US 31290 & 31293 MUST be provided

    Issue Date= Date of training completion As shown on certificate

    Expiry Date= 2 year  3 years from completion date of training issueElectrical


    Fire Warden.

    Trained.Fire Awareness US3271, 4647

    The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 3271, 4647
      • NZQA Record of Achievement showing completion of the following unit standards 3271, 464
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible

    Where the evidence completion date exceeds 2 years, an additional refresher certificate, or competency card from a NZQA accredited training organisation showing refresher course completion of US 3271, 4647 MUST be provided

    Issue Date = Date of Training completion.

    Expiry Date = 2 years from the date of training completion

    Engineering Civil.Course.Understanding NZS3910

    The required evidence will be the following:

      • Certificate issued from NZ Institute of Highway Technology showing course attendance for Understanding NZs3910:2013 Conditions of Contract
    • Date of training completion must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date = Date of

    Training completion.

    Expiry Date =
    Non-expiring 






    Expand
    titleLicences


    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of PE Pipe Welding - US 10987 or 31524 or Perform Butt Fusion Jointing on PE Pipe
    • NZQA Record of Achievement showing completion the following unit standards 10987 or 31524
  • Date of training completion or date of unit standards achieved must be visibleHeavy Vehicle.Certificate.Forklift OSH expiry
    • Certificate of competency or competency card showing completion of an OSH forklift operators’ course or Operations and instructions of powered industrial lift trucks (forklifts)
  • Issue and
  • Date of training completion or date of unit standards achieved must be visible
  • evidence If completion date on evidence exceeds 3 years, an additional refresher certificate or competency card showing completion of an OSH forklift operators’ course or Operations and instructions of powered industrial lift trucks (forklifts) = Date of training completionExpiry Date= 3 years training competition .Date of birth must match the applicants DOB in the system copyWhere the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class T with valid expiry date : Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

    Heavy Vehicle.Licence.Wheels EndorsementHigh Risk Work.Course.Heavy Four Wheel Drive
    Competency Competency Requirements Upload RequirementsExamples

    Electrical.Licence.Registered with EWRB

    The required evidence will be one of the following:

        • Screen shot from the EWRB Website showing EWRB licence
        • EWRB card
    • Must show completion date
    • Must have valid expiry date
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date = Date of training completion

    Expiry Date = 2 year from completion of training 


    Electrical.Licence.Registered with EWRB - Cable Jointer

    The required evidence will be one of the following:

      • Screen shot from the EWRB Website showing EWRB Cable Jointer Licence
      • EWRB cable jointer card
    • Must show completion date
    • Must have expiry date
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date = Date of training completion

    Expiry Date = 2 year from completion of training 


    Electrical.Licence.Registered with EWRB - Electrical Service Technician

    The required evidence will be one of the following:

      • Screen shot from the EWRB Website showing EWRB Electrical Service Technician licence
      • EWRB Electrical Service Technician card
    • Must show completion date
    • Must have valid expiry date
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date = Date of training completion

    Expiry Date = 2 year from completion of training 


    Electrical.Licence.Registered with EWRB - Electrician

    The required evidence will be one of the following:

      • Screen shot from the EWRB Website showing EWRB Electrician licence
      • EWRB Electrician card
    • Must show completion date
    • Must have valid expiry date
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date = Date of training completion

    Expiry Date = 2 year from completion of training 


    High Risk Work.Licence.PE Pipe Welding - Butt

    The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of PE Pipe Welding - US 10987 or 31524 or Perform Butt Fusion Jointing on PE Pipe
      • NZQA Record of Achievement showing completion the following unit standards 10987 or 31524
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing PE Pipe Welding - US 10987 or 31524 or Perform Butt Fusion Jointing on PE Pipe MUST be

    Issue Date = Date of training completion

    Expiry Date = 2 year from completion of training 


    Heavy Vehicle.Certificate.Forklift OSH

    The required evidence will be one of the following:

      • Certificate of competency or competency card showing completion of an OSH forklift operators’ course or Operations and instructions of powered industrial lift trucks (forklifts)
    • Issue and expiry date must be visible and current
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    If completion date on evidence exceeds 3 years, an additional refresher certificate or competency card showing completion of an OSH forklift operators’ course or Operations and instructions of powered industrial lift trucks (forklifts) MUST be provided

    Issue Date= Date of training completion

    Expiry Date= 3 years from the date of training competition 

    Heavy Vehicle.Licence.Endorsement Class 2

    The required evidence will be one of the following:

      • New Zealand drivers’ licence (Both sides of card) showing class 2
      • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class 2 condition as achieved within the past 4 weeks
    • Expiry date must be visible and current
    • Applicant’s name should be displayed on the licence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class 2 with valid expiry date MUST be provided 

    Issue Date: Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.


    Heavy Vehicle.Licence.Endorsement Class 3

    The required evidence will be one of the following:

      • New Zealand drivers’ licence (Both sides of card) showing class 3
      • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class 2 condition as achieved within the past 4 weeks
    • Expiry date must be visible and current
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the licence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class 3 with valid expiry date MUST be provided

    Issue Date: Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.


    Heavy Vehicle.Licence.Endorsement Class 4

    The required evidence will be one of the following:

      • New Zealand drivers’ licence (Both sides of card) showing class 4
      • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class 2 condition as achieved within the past 4 weeks
    • Expiry date must be visible and current
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence licence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence completion date exceeds 2 yearsexpiry date has past, an additional certificate or competency card issued from a NZQA accredited training organisation showing PE Pipe Welding - US 10987 or 31524 or Perform Butt Fusion Jointing on PE Pipe MUST be

    Issue Date = Date of training completion

    Expiry Date = 2 year from completion of training 

    New Zealand drivers’ licence (Both sides of card) showing class 4 with valid expiry date MUST be provided

    Issue Date: Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.


    Heavy Vehicle.Licence.Endorsement Class 5

    The required evidence will be one of the following:

        • New Zealand drivers’ licence (Both sides of card) showing class 5
        • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class 2 condition as achieved within the past 4 weeks
    • Expiry date must be visible and current
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the
    • licence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class 5 with valid expiry date MUST be provided

    Issue Date

    : Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of

    evidence issue date.


    Heavy Vehicle.Licence.Endorsement Class 2Forklift

    The required evidence will be one of the following:

        • New Zealand drivers’ licence (Both sides of card) showing
      • class 2
        • Forklift Endorsement
        • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class
      • 2
        • F condition as achieved
      • within the past 4 weeks
    • Expiry date must be visible and currentcurrent
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the licence evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class 2 5 with valid expiry date MUST be provided provided

    Issue Date: Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.


    Heavy Vehicle.Licence.Rollers Endorsement Class 3

    The required evidence will be one of the following:

        • New Zealand drivers’ licence (Both sides of card) showing class
      • 3
        • R condition as achieved and current
        • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class
      • 2
        • R condition as achieved within the past 4 weeks
    • Expiry date must be visible and current
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the licence evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class 3 R with valid expiry date MUST be provided

    Issue Date: Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.


    Heavy Vehicle.Licence.Tracks Endorsement Class 4

    The required evidence will be one of the following:

        • New Zealand drivers’ licence (Both sides of card) showing class
      • 4
        • T condition as achieved and current
        • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class
      • 2
        • T condition as achieved within the past 4 weeks
    • Expiry date must be visible and current
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the licence evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class 4 T with valid expiry date MUST be provided

    Issue Date: Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.


    Heavy Vehicle.Licence.Wheels Endorsement Class 5

    The required evidence will be one of the following:

        • New Zealand drivers’ licence (Both sides of card) showing class 5W condition as achieved and current
        • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class 2 W condition as achieved within the past 4 weeks
    • Expiry date must be visible and current
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the licence evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class 5 W with valid expiry date MUST be provided

    Issue Date: Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.


    Heavy VehiclePlumber.Licence.Endorsement ForkliftPGDB - Plumber

    The required evidence will be one of the following:

        • New Zealand drivers’ licence (Both sides of card) showing Forklift Endorsement
        • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class F condition as achievedCertificate or competency card issued from Plumbing, Gas, and Drainage Board – Registered Plumber
    • Expiry date must be visible and currentWhere assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class 5 Certificate or competency card issued from Plumbing, Gas, and Drainage Board – Registered Plumber with valid expiry date MUST be provided

    Issue Date: Not Required Licence registration date on evidence

    Expiry Date: As shown Expiry registration date on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

    Heavy Vehicle.Licence.Rollers Endorsementevidence (1 year from registration date)


    Plumber & Gas Fitting Drainer.Licence.Plumber, Gasfitters & Drainlayer Board

    The required evidence will be one of the following:

        • New Zealand drivers’ licence (Both sides of card) showing class R condition as achieved and current
        • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class R condition as achieved within the past 4 weeksCertificate or competency card showing registration licence issued from Plumbing, Gas, and Drainage Board
    • Expiry date must be visible and currentWhere assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class R Certificate or competency card showing registration licence issued from Plumbing, Gas, and Drainage Board with valid expiry date MUST be provided

    Issue Date: Not Required Licence registration date on evidence

    Expiry Date: As shown Expiry registration date on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

    Heavy Vehicle.Licence.Tracks Endorsement

    The required evidence will be one of the following:

      • New Zealand drivers’ licence (Both sides of card) showing class T condition as achieved and current
      • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class T condition as achieved within the past 4 weeks
  • Expiry date must be visible and currentevidence (1 year from registration date)

    High Risk Work.Course.Heavy Four Wheel Drive

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Heavy Four-Wheel Drive Course
        • NZQA Record of Achievement showing completion of the following unit standards 1737, 1738, 17976, 17978
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted)
    • .
    • Copy must be clear and legible
    • Can be in colour copy OR black and white

    If completion date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements

      • Downer OSM – no expiry date
      • All other sites – 3 years from completion date

    An additional certificate or competency card issued from a NZQA accredited training organisation showing completion of Heavy Four-Wheel Drive Course or refresher MUST be provided

    • Issue Date
    • = Date of training completion
    • Expiry Date=
      • Downer OSM – no expiry date
      • All other sites – 3 years from completion date

    High Risk Work.Course.Helicopter Lifting Safety Awareness

    The required evidence will be one of the following:

        • New Zealand drivers’ licence (Both sides of card) showing class W condition as achieved and current
        • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class W condition as achieved within the past 4 weeks
    • Expiry date must be visible and current
        • Course Completion Certificate from the New Zealand Fire Service – Helicopter Safety Awareness
        • NZQA Record of Achievement showing completion of the following either Unit Standard 9580 or, 32095
    • Date of training completion or date of unit standard achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of birth must match the applicants DOB in the system.
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional New Zealand drivers’ licence (Both sides of card) showing class W with valid expiry date MUST be provided

    Issue Date: Not Required

    Expiry Date: As shown on the evidence

    If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

    Plumber.Licence.PGDB - Plumber

    Issue Date= Date of training completion


    Expiry Date= Not required 

    High Risk Work.Course.Light Four Wheel Drive

    The required evidence will be one of the following:

        • Certificate or competency card issued from Plumbing, Gas, and Drainage Board – Registered Plumber
    • Expiry date must be visible and current
        • a NZQA accredited training organisation showing US 17976, 17978
        • NZQA Record of Achievement showing completion of the following unit standards 17976, 17978
        • Chorus WTC 6 Remote Tracks Access or Refresher Certificate from a NZQA accredited training organisation
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence expiry date has past, an additional Certificate or competency card issued from Plumbing, Gas, and Drainage Board – Registered Plumber with valid expiry date

    If completion date on NZQA record of achievement, certificate or competency card completion date exceeds an additional certificate or competency card issued from a NZQA accredited training organisation showing either

      • Light Four-Wheel Drive Course
      • Chorus WTC 6 Remote Tracks Access or Refresher Certificate MUST be provided

    Issue Date: Licence registration date on evidenceDate= Date of training completion


    Expiry Date: Expiry registration date on evidence (1 year from registration date)Plumber & Gas Fitting Drainer.Licence.Plumber, Gasfitters & Drainlayer Board= 3 Years from completion date on certificate 

    High Risk Work.Course.Light Utility Vehicle

    • The required evidence will be
    one of the following
    • a:
      • Certificate or competency card
    • showing registration licence issued from Plumbing, Gas, and Drainage Board
    • Expiry date must be visible and current
      • issued from a NZQA accredited training organisation showing US 24553, 24556, 24558, 24560, 24562
      • NZQA Record of Achievement showing completion of the following unit standards 24553, 24556, 24558, 24560, 24562
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Where the evidence completion date exceeds site (Downer business units) refresher requirements
      • Downer OSM – no expiry
    date has past, an additional Certificate
      • All other sites – 3 years from completion date
    An additional certificate or competency card showing registration licence issued from Plumbing, Gas, and Drainage Board with valid expiry date a NZQA accredited training organisation showing US 24553, 24556, 24558, 24560, 24562 MUST be provided

    Issue Date: Licence registration date on evidenceDate= Date of training completion

    Expiry Date

    : Expiry registration date on evidence (1 year from registration date)

    =

      • Downer OSM – no expiry date
      • All other sites – 3 years from completion date

    Builder.Licence.New Zealand Building Practitioner
    • The required evidence will be
    one of the following
    • a:
      • Certificate or competency card issued from
    • a NZQA accredited training organisation showing completion of Heavy Four-Wheel Drive Course
    • NZQA Record of Achievement showing completion of the following unit standards 1737, 1738, 17976, 17978
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible
      • Licenced Building Practitioner, New Zealand Practicing Licensing
    • Expiry date must be clear and visible
    • Where the evidence completion date exceeds 5 years, an additional certificate or competency card issued from Licenced Building Practitioner, New Zealand Practicing Licensing MUST be provided
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white

    If completion date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements

      • Downer OSM – no expiry date
      • All other sites – 3 years from completion date
    An
    • copy
    Where the evidence completion date exceeds 5 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing completion of Heavy Four-Wheel Drive Course or refresher Licenced Building Practitioner MUST be provided

    Issue Date=

    Date of training completion

    Licence issue date on certificate 

    Expiry Date=

  • Downer OSM – no expiry date
  • All other sites – 3 years from completion date

    5 years from issue date




    title Certifications
    Expand
    titleHigh Risk Work Certifications


    Competency Competency Requirements Upload RequirementsExamples

    High Risk Work.Course.

    Helicopter Lifting Safety Awareness

    ANZ Working at Heights - 17600, 25045, 23229

    The required evidence will be one of the following:

    Course Completion
        • Certificate
    from the New Zealand Fire Service – Helicopter Safety Awareness
        • or competency card issued from a NZQA accredited training organisation showing completion of US 23229, 25045, 17600
        • NZQA Record of Achievement showing completion of the following
    either Unit Standard 9580 or, 32095Date of training completion or date of unit standard achieved must be visible
        • unit standards 23229, 25045, 17600
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card, an additional refresher certificate, or competency card from a NZQA accredited training organisation showing US 23229, 25045, 17600 MUST be provided

    Issue Date= Date of training completion


    Expiry Date=

    Not required 

    3 years from the date of training competition


    High Risk Work.Course.
    Light Four Wheel Drive
    Working at Heights Advanced - 15757, 17600, 25045, 23229

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
    US 17976, 17978
        • completion of US 15757, 17600, 25045, 23229
        • NZQA Record of Achievement showing completion of the following unit standards
    17976, 17978
  • Chorus WTC 6 Remote Tracks Access or Refresher Certificate from a NZQA accredited training organisation
        • 15757, 17600, 25045, 23229
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    If completion date on NZQA record of achievement, certificate or competency card Chorus WTC 6 Remote Tracks Access or Refresher Certificate

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

  • Light Four-Wheel Drive Course
        • Working at Heights Advanced with transcript showing US 15757, 17600, 25045, 23229  
        • Working at Heights with US 15757, 17600, 25045, 23229 MUST be provided

    Issue Date= Date of training completion


    Expiry Date= 3
    Years
    years from
    completion date on certificate 
    the date of training competition
    High Risk Work.Course.
    Light Utility Vehicle
    Working at Heights Electrical - 17025, 23229, 10509

    The required evidence will be

    a

    one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
    US 24553, 24556, 24558, 24560, 24562
        • completion of Working at Height Electrical with transcript showing US 17025, 23229, 10509
        • Working at Heights with transcript showing US 17025, 23232, 10509
        • NZQA Record of Achievement showing completion of the following unit standards
    24553
        • 17025,
    24556, 24558, 24560, 24562
        • 23229, 10509
        • WTC 5 Working at Heights or Refresher Certificate with transcript showing US 17025, 23229, 10509 from a NZQA accredited training organisation
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds

    site (Downer business units) refresher requirements
    • Downer OSM – no expiry
    • All other sites – 3 years from completion date
    An

    3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

    US 24553, 24556, 24558, 24560, 24562

      • Working at Heights Electrical with transcript showing US 17025, 23232, 10509
      • Working at Heights with US 17025, 23232, 10509
      • WTC 5 Working at Heights Refresher Certification with transcript showing US 17025, 23229, 10509 MUST be provided

    Issue Date= Date of training completion


    Expiry Date=
  • Downer OSM – no expiry date
  • All other sites –
    3 years from
    completion date
    Expand
    the date of training competition

    High Risk Work

    Working at Heights Safety Harness - 23229 completion of US 23239 or Working at Heights Safety Harness 23239WTC 5 Working at Heights Date of training completion or date of unit standards achieved must be visibleWhere the evidence 3 WTC 5 Working at Heights
  • Working at Heights US23239
  • Working at Heights Safety Harness
  • 3 Mobile Elevating Work Platforms (MEWP) Elevated Work Platforms. Any combination of the following Unit Standards 15757, 17600, 17025, 10509, 23229, 23232, 25045 must be visible on the certificate or combined with course transcript showing unit standards achieved completion of any combination of the following unit standards 15757, 17600, 17025, 10509, 23229, 23232, 25045Chorus WTC 2 Elevated Work Platforms or Refresher Certificate combined with the course transcript showing Unit standards achieved/refreshed from a NZQA accredited training organisation standards Where the evidence 3
      • Certificate showing any combination of the following unit standards 15757, 17600, 17025, 10509, 23229, 23232, 25045
      • Chorus WTC 2 Elevated Work Platforms with course transcript and US achieved MUST be provided

    Issue Date= Date of training completion

    Expiry Date= 3 years from the date of training competition

    Not requiredConfined Space Entry - 17599, 18426, 25510 Confined Space US 17599, 18426, 25510 of 17599, 18426, 25510Chorus WTC 4 Confined Spaces or Refresher Certificate from a NZQA accredited training organisation
  • Date of training completion or date of unit standard achieved must be visible
  • If on NZQA record of achievement, certificate, or competency card completion date eitherConfined Space Certificate with transcript showingUS17599, 18426, 25510Chorus WTC 4 Confined Spaces or Refresher Certificate 2 PE Pipe Welding - Electrofusion completion of PE Pipe Welding - Electrofusion US 10980 standards 10980 standards PE Pipe Welding - US 10980 refresher Rigging & Slinging one of the following Rigging & Slinging showing US 3789 & 30072Date of training completion or date of unit standards achieved must be visible 3789 & 30072Where the evidence completion date exceeds 2 years, an Rigging &Slinging US 3789, 30072 the of training competitionTruck Loader Crane one of the following Truck Loader Crane US 16617 standard 16617
  • Date of training completion or date of unit standard achieved must be visible
  • 2 years, an Truck Loader Crane the of training competition
    Competency Competency Requirements Upload RequirementsExamples

    High Risk Work.Course.ANZ Working at Heights Fall Arrest - 17600, 2504515757, 23229

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Heights Fall Arrest with transcript showing US 17025, 23229 , 25045, 17600or Certificate showing US 15757, 23229
        • NZQA Record of Achievement showing completion of the following unit standards 23229, 25045, 1760017025, 23229
        • WTC 5 Working at Heights Refresher Certificate from NZQA accredited training organisation
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completedDate of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card, an additional refresher certificate, or competency card issued from a NZQA accredited training organisation showing either

      • Working at Heights Fall Arrest with transcript showing US 15757, 23229
    , 25045, 17600
      • Working at Heights with US 15757, 23232
    WTC 5 Working at Heights Refresher Certificate MUST be provided

    Issue Date= Date of training completion


    Expiry Date= 3 years from the date of training competition

    High Risk Work.Course.Working at Heights Advanced Horizontal and Vertical - 15757, 17600, 25045, 23229

    The required evidence will be one of the following:

          • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 15757, 17600
        • , 25045, 23229
          • NZQA Record of Achievement showing completion of the following unit standards 15757, 17600
        • , 25045, 23229
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

      • Working at Heights
      • Advanced
      • Horizontal and Vertical with transcript showing US 15757, 17600
      • , 25045, 23229  
    Working at Heights with transcript showing US 15757, 17600 , 25045, 23229 MUST be provided

    Issue Date= Date of training completion


    Expiry Date= 3 years from the date of training competition

    High Risk Work.Course.Working at Heights Electrical Pole Top Rescue - 17025, 23229, 10509

    The required evidence will be one of the following:

          • Certificate or competency card issued from a NZQA accredited training organisation
        • showing completion of Working at Height Electrical with transcript showing US 17025, 23229, 10509
          • showing completion of US 17025 or Working at Heights Pole Top Rescue with transcript showing US 17025
        • , 23232, 10509
          • NZQA Record of Achievement showing completion
        • of
          • the following unit standards 17025
        • , 23229, 10509
          • WTC 5 Working at Heights or Refresher Certificate with transcript showing US 17025
        • , 23229, 10509 from a
          • from NZQA accredited training organisation
          • WTC 3 Overhead Network with Fall Arrest or Refresher Certificate with transcript showing US 17025 from NZQA accredited training organisation
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

      • Working at Heights Electrical Pole Top Rescue with transcript showing US 17025, 23232, 10509
      • Working at Heights with US 17025, 23232, 10509
      • WTC 5 Working at Heights Refresher Certification or Refresher Certificate with transcript containing US 17025
      • WTC3 Overhead Network with Fall Arrest or refresher with transcript showing containing US 17025, 23229, 10509 MUST be provided

    Issue Date= Date of training completion


    Expiry Date= 3 years from the date of training competition

    High Risk Work.Course.Working at Heights Fall Arrest - 15757, 23229Rescue Planning - 23232

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 23232 or Working at Heights Fall Arrest Rescue Planning with transcript showing US 17025, 23229 or Certificate showing US 15757, 2322923232
        • NZQA Record of Achievement showing completion of the following unit standards 17025, 23229
        • WTC 5 Working at Heights Refresher Certificate from NZQA accredited training organisation
        • standard 23232
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

      • Working at Heights Fall Arrest Rescue Planning with transcript showing US 15757, 2322923232
      • Working at Heights with US 15757, 23232
    WTC 5 Working at Heights Refresher Certificate
      • MUST be provided

    Issue Date= Date of training completion


    Expiry Date= 3 years from the date of training competition

    High Risk Work.Course.Working at Heights Horizontal and Vertical - 15757, 17600Safety Harness - 23229

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US
        • 15757, 17600
        • 23239 or Working at Heights Safety Harness
        • NZQA Record of Achievement showing completion
        • of
        • the following unit standards
        • 15757, 17600
        • 23239
        • WTC 5 Working at Heights or Refresher Certificate
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

        • Working at Heights
      • Horizontal and Vertical with transcript showing US 15757, 17600
    Working at Heights with transcript showing US 15757, 17600
        • US23239
        • Working at Heights Safety Harness
        • WTC 5 Working at Heights or Refresher Certificate MUST be provided

    Issue Date= Date of training completion


    Expiry Date= 3 years from the date of training competition


    High Risk Work.Course.Working at Heights Pole Top Rescue - 17025Mobile Elevating Work Platforms (MEWP)

    The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing
      • completion of US 17025 or Working at Heights Pole Top Rescue with transcript showing US 17025
      • Elevated Work Platforms. Any combination of the following Unit Standards 15757, 17600, 17025, 10509, 23229, 23232, 25045 must be visible on the certificate or combined with course transcript showing unit standards achieved
      • NZQA Record of Achievement showing completion of any combination of the following unit standards 15757, 17600, 17025, 10509, 23229, 23232, 25045
      • WTC 5 Working at Heights
      • Chorus WTC 2 Elevated Work Platforms or Refresher Certificate combined with the course transcript showing
      • US 17025 from NZQA accredited training organisationWTC 3 Overhead Network with Fall Arrest or Refresher Certificate with transcript showing US 17025 from
      • Unit standards achieved/refreshed from a NZQA accredited training organisation
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standards achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

  • Working at Heights Pole Top Rescue with transcript showing US 17025
  • Working at Heights with US 17025
  • WTC 5 Working at Heights or Refresher Certificate with transcript containing US 17025
  • WTC3 Overhead Network with Fall Arrest or refresher with transcript containing US 17025,

      • Certificate showing any combination of the following unit standards 15757, 17600, 17025, 10509, 23229, 23232, 25045
      • Chorus WTC 2 Elevated Work Platforms with course transcript and US achieved MUST be provided

    Issue Date= Date of training completion


    Expiry Date= 3 years from the date of training competition


    High Risk Work.Course.

    Working at Heights Rescue Planning - 23232

    Confined Space Awareness - 18426

    Note this competency is for use within Downer Telco Site.

    The required evidence will be one of the following:

      • Certificate or competency card issued from a
      • NZQA
      • accredited training organisation showing completion of US 23232 or Working at Heights Rescue Planning with transcript showing 23232NZQA
      • Record of Achievement showing completion of the following unit
      • standard 23232
    • Date of training completion or date of unit standards achieved must be visible
      • standards 18426,
      • iSkills certificate showing Confined Space Awareness
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

      • Working at Heights Rescue Planning with transcript showing 23232
      • Working at Heights with US 23232 MUST be provided

    Issue Date= Date of training completion


    Expiry Date=

    3 years from the date of training competition

    Not required


    High Risk Work.Course.

    Confined Space Entry - 17599, 18426, 25510

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
        • Confined Space US 17599, 18426, 25510
        • NZQA Record of Achievement showing completion of the following unit standards
        • 17599, 18426, 25510
        • Chorus WTC 4 Confined Spaces or Refresher Certificate
        • from a NZQA accredited training organisation
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    If completion date on NZQA record of achievement, certificate, or competency card completion date exceeds

    2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

      • Confined Space Certificate with transcript showingUS17599, 18426, 25510
      • Chorus WTC 4 Confined Spaces or Refresher Certificate MUST be provided

    Issue Date= Date of training completion


    Expiry Date=

    2 years from the date of training competition


    High Risk Work.Course.

    Confined Space Entry with Fall Prevention - 15799, 18426, 25510, 19207

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
        • the completion of US 17599, 18426, 25510, 19025 or Confined Space Entry with Fall Prevention - Two Combined Certificates may be used and lowest expiry date is used.
        • NZQA Record of Achievement showing
        • completion of the following unit standards 17599, 18426, 25510, 19025
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit
    • standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    If completion date on NZQA record of achievement, certificate or competency completion date exceeds

    Note this competency is for use within Downer Telco Site.

    The required evidence will be one of the following:

      • NZQA Record of Achievement showing completion of the following unit standards 18426,
      • iSkills certificate showing Confined Space Awareness
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

    High Risk Work.Course.Confined Space Awareness - 18426

      • Confined Space with Fall Prevention US 17599, 18426, 19025 (two combined certificates showing all US is acceptable – lowest expiry date is used) MUST be provided

    Issue Date= Date of training completion


    Expiry Date=

    2 years from the date of training competition


    High Risk Work.Course.

    PE Pipe Welding - Electrofusion

    The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing
      • completion of PE Pipe Welding - Electrofusion US 10980
      • NZQA Record of Achievement showing completion
      • the following unit standards
      • 10980
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing PE Pipe Welding - US 10980 refresher MUST be provided

    Issue Date= Date of training completion


    Expiry Date=
    3 years from the date of training competition

    High Risk Work.Course.Confined Space Entry with Fall Prevention - 15799, 18426, 25510, 19207Rigging & Slinging

    The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing
      • the completion of US 17599, 18426, 25510, 19025 or Confined Space Entry with Fall Prevention - Two Combined Certificates may be used and lowest expiry date is used.
      • Rigging & Slinging showing US 3789 & 30072
      • NZQA Record of Achievement showing completion of the following unit standards
      • 17599, 18426, 25510, 19025
      • 3789 & 30072
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completedDate of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    If Where the evidence completion date on NZQA record of achievement, certificate or competency completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing Confined Space with Fall Prevention US 17599, 18426, 19025 (two combined certificates showing all US is acceptable – lowest expiry date is used) Rigging &Slinging US 3789, 30072 MUST be provided

    Issue Date= Date of training completion


    Expiry Date= 2 3 years from the date of training competition

    High Risk Work.Course.

    Truck Loader Crane

    The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing
      • Truck Loader Crane US 16617
      • NZQA Record of Achievement showing completion of the following unit
      • standard 16617
    • Date of training completion or date of unit
    • standard achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing
    Truck Loader Crane MUST be provided

    Issue Date= Date of training completion


    Expiry Date= 3 years from the date of training competition

    High Risk Work.Course.

    Chainsaw

    • The required evidence will be
    • either a:
      • Certificate or competency card issued from a NZQA accredited training organisation showing
      • Chainsaw Course completion
      • NZQA Record of Achievement showing completion of the following unit standards
      • 6916& 6917
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • If completion date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements
      • Downer OSM – no expiry date
      • All other sites – 3 years from completion date
    • An additional certificate or competency card issued from a NZQA accredited training organisation showing
    • Chainsaw course MUST be provided

    Issue Date= Date of training completion

    Expiry Date=

    Downer OSM Site

    no expiry date

    All other Sites

    3 years from

    completion date


    High Risk Work.Course.

    Concrete Saw

    • The required evidence will be
    • either a:
      • Certificate or competency card issued from a NZQA accredited training organisation showing
      • completion of Concrete Saw course
      • NZQA Record of Achievement showing completion of the following unit
      • standards 26822 & 26823
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Where the evidence completion date exceeds
    • business unit (site) refresher requirements
      • Downer OSM – no expiry date
      • All other sites – 3 years from completion date
        • An additional certificate or competency card issued from a NZQA accredited training organisation showing
        • concrete saw course MUST be provided

    Issue Date= Date of training completion

    Expiry Date=

    Downer OSM Site

    no expiry date

    All other Sites

    3 years from

    completion date





    Expand
    titleUnit Standards - High Risk Work


    Competency Competency Requirements Upload RequirementsExamples

    High Risk Work.Unit Standard.17309 - Operate a wheeled loader on infrastructure works sites

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US17309 - Operate a wheeled loader on infrastructure works sites
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.1737 - Drive a heavy vehicle on unsealed road surfaces

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US1737 - Drive a heavy vehicle on unsealed road surfaces
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.1738 - Drive a heavy vehicle in an off-road environment

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US1738 - Drive a heavy vehicle in an off-road environment
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.17599 - Plan a confined space entry

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US17599 - Plan a confined space entry
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.17976 - DKO operating a light 4WD vehicle in an off-road environment

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US17976 - DKO operating a light 4WD vehicle in an off-road environment
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.17978 - Operate a light 4WD vehicle in an off-road environment

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US17978 - Operate a light 4WD vehicle in an off-road environment
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.18037 - Plan a confined space entry in the electricity supply industry

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US18037 - Plan a confined space entry in the electricity supply industry
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.18272 - Operate a mobile elevating work platform (MEWP) in the ESI

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US18272 - Operate a mobile elevating work platform (MEWP) in the ESI
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.18426 - DKO hazards associated with confined spaces

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US18426 - DKO hazards associated with confined spaces
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.19207 - Work in a confined space in the infrastructure industry

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US19207 - Work in a confined space in the infrastructure industry
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.20875 - DKO slinging, lifting, moving, and placing loads using mobile plant

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US20875 - DKO slinging, lifting, moving, and placing loads using mobile plant
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.22279 - Operate a skid steer on infrastructure works sites

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US22279 - Operate a skid steer on infrastructure works sites
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.23232 - Develop a rescue plan for recovery of a suspended individual after a fall

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • 23232 - Develop a rescue plan for recovery of a suspended individual after a fall
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.23962 - Self-propelled Boom Lift Elevating Work Platform (EWP)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US23962 - Self-propelled Boom Lift Elevating Work Platform (EWP)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervision

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervision
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.24556 - DKO the safe operation of a light utility vehicle (LUV)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US24556 - DKO the safe operation of a light utility vehicle (LUV)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safe

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safe
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.30072 - Demonstrate and apply knowledge of slinging regular loads safely

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US30072 - Demonstrate and apply knowledge of slinging regular loads safel
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.3789 - Sling varied regular loads and safely direct a crane during crane operations

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US3789 - Sling varied regular loads and safely direct a crane during crane operations
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.6916 - DKO the rules relating to chainsaw use

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US6916 - DKO the rules relating to chainsaw use
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    High Risk Work.Unit Standard.6917 - Demonstrate basic chainsaw operation

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US6917 - Demonstrate basic chainsaw operation
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    Rope.Unit Standard.15757 - Use, install & disestablish temporary proprietary height safety systems

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US15757 - Use, install & disestablish temporary proprietary height safety systems
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    Rope.Unit Standard.23229 - Use safety harness system when working at height

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US23229 - Use safety harness system when working at height
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    Crane Vehicle Loader.Unit Standard.16617 - Use a truck loader crane to lift & place regular loads
    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US16617 - Use a truck loader crane to lift & place regular loads
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    Heavy Vehicle.Unit Standard.10851 - Operate a powered industrial lift truck (forklift)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US10851 - Operate a powered industrial lift truck (forklift)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    Heavy Vehicle.Unit Standard.16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    Heavy Vehicle.Unit Standard.16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    Heavy Vehicle.Unit Standard.16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    Heavy Vehicle.Unit Standard.17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required

    Heavy Vehicle.Unit Standard.18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)

    • The required evidence will be a:
      • NZQA Record of Achievement showing completion of the following unit standard:
        • US18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

    Issue Date = Credit Result date


    Expiry Date = Not Required


    ...