Versions Compared

Old Version 50

changes.mady.by.user Gracielle Molino

Saved on

compared with

New Version 51

changes.mady.by.user Anika McEvoy

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Expand
titleNationally Accredited Training

Anchor
NDTandWeldingNAT
NDTandWeldingNAT

Competency NameCompetency RequirementsUpload RequirementsExamples
Boilermaker.Trade.Qualification - Boilermaker
  • Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Samples of Accepted document types:
    • Completion of Trade
    • Completion of Apprenticeship
    • Certificate of Proficiency
    • Trade Certificate
    • Certificate of Completion / Certificate of Qualification
    • Certificate III
    • Australian Recognised Trade Certificate
  • Samples of Accepted Course Titles / Coding:
    • Engineering Tradesperson (Fabrication)
    • Engineering Tradesperson (Fabrication) (Boilermaking)
    • Engineering / Fabrication Trade
    • Engineering Fabrication Trade (Heavy Fabrication - Boilermaking)
    • Engineering Construction (Welding - Pipework)
    • Welder, First Class (Boilermaking)
    • MEM30319 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au)
  • Samples of Course Titles / Coding that must be escalated for client review / sign-off:
    • Engineering Tradesperson
  • Must be an Australian or New Zealand (ANZCO) issued qualification - international qualifications outside of this are not accepted

  • Black and white or colour acceptable

  • Must be clearly scanned and legible

  • Issue Date = Date of completion
  • Expiry Date = No expiry date to be entered

Welder.Certificate.Welding Supervisor

  • Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Evidence will be a certificate showing completion of 'Welding Supervisor' course referencing standards AS 2214-2004
  • Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia
  • Issue Date = Date of completion
  • Expiry Date = No expiry date to be entered

Welder.-.WTIA Licence - AS2214 Welding Supervisor
  • Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Evidence will be a licence showing completion of 'Welding Supervisor' course referencing standards AS 2214-2004
  • Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia
  • Issue Date = Date of completion
  • Expiry Date = No expiry date to be entered

Welder.Course.Certified Welding Inspector

  • Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Evidence will be a certificate or card showing completion of 'Welding Inspector' or 'Welding Supervisor'
  • Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia
  • Issue Date = Date of completion
  • Expiry Date = No expiry date to be entered

Welder.Trade.Qualification - Welding (First Class)

  • Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Samples of Accepted document types:
    • Australian Recognised Trade Certificate
    • Certificate of Completion of Apprenticeship
    • Certificate III
  • Samples of Accepted Course Titles / Coding:
    • Welder, First Class (Boilermaking)
    • Sheet Metal (First Class)
    • Engineering Fabrication
  • Must be an Australian or New Zealand (ANZCO) issued qualification - international qualifications outside of this are not accepted

  • Black and white or colour acceptable

  • Must be clearly scanned and legible

  • Issue Date = Date of completion
  • Expiry Date = No expiry date to be entered

Certificate.Accreditation.Ultrasonic Impact Treatment accreditation
  • Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Issue Date = Date of completion
  • Expiry Date = No expiry date to be entered

Site.-.NDT; AINDT or PCN Accreditation Level 1
  • Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 1' being explicitly nominated.
  • Evidence must be issued by either AINDT or PCN
  • Issue Date = As shown on the document
  • Expiry Date = As shown on the document

Site.-.NDT; AINDT or PCN Accreditation Level 2
  • Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 2' being explicitly nominated.
  • Evidence must be issued by either AINDT or PCN
  • Issue Date = As shown on the document
  • Expiry Date = As shown on the document

Site.-.NDT; AINDT or PCN Accreditation Level 3
  • Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 3' being explicitly nominated.
  • Evidence must be issued by either AINDT or PCN
  • Issue Date = As shown on the document
  • Expiry Date = As shown on the document



Expand
titleSite Based Assessments

Anchor
NDTandWeldingRTAY
NDTandWeldingRTAY

Competency NameCompetency RequirementsUpload RequirementsExamples

Welder.-.RTAY Welding General - THEORY; 31415698

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 99 years from issue date


Welder.-.RTAY Welding General Purpose GMAW; 31260273

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Theory Assessment or Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate

  • The learning and development section of the form does not need to be completed










Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 2 years from issue date



















Welder.-.RTAY Welding General Purpose GTAW; 31260274

Welder.-.RTAY Welding General Purpose MMAW; 31108073

Welder.-.RTAY Welding Pressure Welding FCAW; 31260276

Welder.-.RTAY Welding Pressure Welding GMAW; 31260275

Welder.-.RTAY Welding Pressure Welding MMAW; 31108226

Welder.-.RTAY Welding Structural FCAW; 31260553

Welder.-.RTAY Welding Structural GMAW; 31260552

Welder.-.RTAY Welding Structural MMAW; 31108075

Site.-.RTAY EI Radiation NDT CoordinatorRule to be confirmed by client

Site.-.RTAY NDT Test Plate Proficiency Level 1

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • The learning and development section of the form does not need to be completed

  • If evidence shows completion of a 'higher level' such as level 3, this can be accepted against the 'lower level' competencies such as level 1 and level 2.

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 50 years from issue date




Site.-.RTAY NDT Test Plate Proficiency Level 2

  • First and last name must match applicant's name in Onsite

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:

    • RTAY Recognition of Prior Competency

    • Rio Tinto Record of Completion

    • Site Authorisation
      All assessment pages within upload
      Matching competency name and code (if with checkbox, this should be completed)
      Applicant's signature and signed date
      Assessor's complete name, signature, and date
      Must show that the person is competent and authorised to operate

NOTE:

  • If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

  • The learning and development section of the form does not need to be completed

  • If evidence shows completion of a 'higher level' such as level 3, this can be accepted against the 'lower level' competencies such as level 1 and level 2.

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 50 years from issue date

Site.-.RTAY NDT Magnetic Particule Testing (MT) Level 1

  • First and last name must match applicant's name in the system

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

  • The following evidence can be accepted:
  • Site Authorisation showing:
    • All assessment pages within upload
    • NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency
Level 3
    • The L1 MT qualification will be ticked on the form
    • Applicant's signature and signed date will be completed
    • Assessor's complete name, signature, and date will be completed
    • Must show that the person is competent and authorised to operate

NOTE:

  • The learning and development section of the form does not need to be completed

Issue date = use the assessor's signature date.

Expiry date = 50 years from issue date



Site.-.RTAY NDT Magnetic Particule Testing (MT) Level 2

  • First and last name must match applicant's name in
Onsite
  • the system

Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

Site Authorisation
  • The following evidence can be accepted:

  • RTAY Recognition of Prior Competency

  • Rio Tinto Record of Completion

    • Site Authorisation showing:
      • All assessment pages within upload
      • NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency
      • The L2 MT qualification will be ticked on the form
      • Applicant's signature and signed date will be completed
      • Assessor's complete name, signature, and date will be completed
      • Must show that the person is competent and authorised to operate

    NOTE:

    The learning and development section of the form does not need to be completed

    Issue date = use the assessor's signature date.

    Expiry date = 50 years from issue date



    Site.-.RTAY NDT Penetrant Testing (PT) Level 1

    • First and last name must match applicant's name in the system

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:
    • Site Authorisation showing:
      • All assessment pages within upload
    Matching competency name and code (if with checkbox, this should be completed)
      • NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency
      • The L1 PT qualification will be ticked on the form
      • Applicant's signature and signed date will be completed
      • Assessor's complete name, signature, and date will be completed
      • Must show that the person is competent and authorised to operate

    NOTE:

    The learning and development section of the form does not need to be completed

    Issue date = use the assessor's signature date.

    Expiry date = 50 years from issue date



    Site.-.RTAY NDT Penetrant Testing (PT) Level 2

    • First and last name must match applicant's name in the system

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:
    • Site Authorisation showing:
      • All assessment pages within upload
      • NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency
      • The L2 PT qualification will be ticked on the form
      • Applicant's signature and signed date will be completed
      • Assessor's complete name, signature, and date will be completed
      • Must show that the person is competent and authorised to operate

    NOTE:

    If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed

    The learning and development section of the form does not need to be completed

    Issue date = use the assessor's signature date.

    Expiry date = 50 years from issue date



    Site.-.RTAY NDT Ultrasonic Testing (UT) Level 2

    • First and last name must match applicant's name in the system

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:
    • Site Authorisation showing:
      • All assessment pages within upload
      • NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency
      • The L2 UT qualification will be ticked on the form
      • Applicant's signature and signed date will be completed
      • Assessor's complete name, signature, and date will be completed
      • Must show that the person is competent and authorised to operate

    NOTE:

    The learning and development section of the form does not need to be completed

    Issue date =

    If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation,

    use the assessor's signature date.

    Expiry date = 50 years from issue date



    Site.-.RTAY NDT Ultrasonics Thickness Testing (UTT) Level 1

    • First and last name must match applicant's name in the system

    Shortened versions of first names are accepted, such as:
    "Chris" instead of "Christopher"
    "Wil" instead of "William"

    Shortened versions of last names are accepted, such as:
    "Herrera" instead of "Herrera Trujillo"
    "Mohd" instead of "Raza Hasan Mohd"

    • The following evidence can be accepted:
    • Site Authorisation showing:
      • All assessment pages within upload
      • Skill name will show as either Rio Tinto Yarwun NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency
      • The L1 UTT qualification will be ticked on the form
      • Applicant's signature and signed date will be completed
      • Assessor's complete name, signature, and date will be completed
      • Must show that the person is competent and authorised to operate

    NOTE:

    The learning and development section of the form does not need to be completed

    Issue date = use the assessor's signature date.

    Expiry date = 50 years from issue date