Page Comparison

Welder.-.RTAY Welding General - THEORY; 31415698

Expand

title	Nationally Accredited Training

Anchor

	NDTandWeldingNAT
	NDTandWeldingNAT

Anchor

NDTandWeldingRTAY

Competency Name

Competency Requirements

Upload Requirements

Examples

Competency Name	Competency Requirements	Upload Requirements	Examples
Boilermaker.Trade.Qualification - Boilermaker	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Samples of Accepted document types: Completion of Trade Completion of Apprenticeship Certificate of Proficiency Trade Certificate Certificate of Completion / Certificate of Qualification Certificate III Australian Recognised Trade Certificate Samples of Accepted Course Titles / Coding: Engineering Tradesperson (Fabrication) Engineering Tradesperson (Fabrication ) (/ Boilermaking) Engineering / Fabrication Trade Engineering Fabrication Trade (Heavy Fabrication - Boilermaking) Engineering Construction (Welding - Pipework) Welder, First Class (Boilermaking) MEM30319 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au) Samples of Course Titles / Coding that must be escalated for client review / sign-off: Engineering Tradesperson Must be an Australian or New Zealand (ANZCO) issued qualification - international qualifications outside of this are not accepted. Black and white or colour acceptable Must be clearly scanned and legible	Issue Date = Date of completion Expiry Date = No expiry date to be entered	Image Removed Image Added
Welder.Certificate.Welding Supervisor	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will be a certificate showing completion of 'Welding Supervisor' course referencing standards AS 2214-2004 Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Welder.-.WTIA Licence - AS2214 Welding Supervisor	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will be a licence showing completion of 'Welding Supervisor' course referencing standards AS 2214-2004 Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia	Issue Date = Date of completion Expiry Date = No expiry date to be entered	Image Removed Image Added
Welder.Course.Certified Welding Inspector	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will be a certificate or card showing completion of 'Welding Inspector' or 'Welding Supervisor' Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding ie TWI – CSWIP 3.1 or CSWIP 3.2; WTIA: Welding Technology Institute of Australia or Weld Australia.	Issue Date = Date of completion Expiry Date = No expiry date to be entered	Image Removed Image Added Image Removed Image Added
Welder.Trade.Qualification - Welding (First Class)	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Samples of Accepted document types: Australian Recognised Trade Certificate Certificate of Completion of Apprenticeship Certificate III Samples of Accepted Course Titles / Coding: Welder, First Class (Boilermaking) Sheet Metal (First Class) Engineering Fabrication Must be an Australian or New Zealand (ANZCO) issued qualification - international qualifications outside of this are not accepted. Black and white or colour acceptable Must be clearly scanned and legible	Issue Date = Date of completion Expiry Date = No expiry date to be entered	Image Removed Image Added
Certificate.Accreditation.Ultrasonic Impact Treatment accreditation	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)	Issue Date = Date of completion Expiry Date = No expiry date to be entered	Image Removed
Site.-.NDT; AINDT or PCN Accreditation Level 1	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 1' being explicitly nominated. Evidence must be issued by either AINDT or PCN	Issue Date = As shown on the document Expiry Date = As shown on the document	Image Removed Image Removed
Site.-.NDT; AINDT or PCN Accreditation Level 2	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 2' being explicitly nominated. Evidence must be issued by either AINDT or PCN	Issue Date = As shown on the document Expiry Date = As shown on the document	Image Removed Image Removed
Site.-.NDT; AINDT or PCN Accreditation Level 3	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 3' being explicitly nominated. Evidence must be issued by either AINDT or PCN	Issue Date = As shown on the document Expiry Date = As shown on the document	Image Removed

Expand

title	Site Based Assessments

Welder.Industry Skilled Welder Coded	INDUSTRY SKILLED - Traceable experience as a CODED WELDER for at least 3 years (verified by fully completed SITE AUTHORISATION – RELEVANT EXPERIENCE EVIDENCE supported with written evidence - resume and referee, responsibility of the employer) PLUS MUST HAVE Tested and certified to ASME Section IX, coded welders (including boiler tube welders) are tested and then re-validated 6 monthly by a certified Cert. 10 welding supervisor, also must be experienced in boiler tube welding – see example ie ASME Section IX EXAMPLE INDUSTRY SKILLED BUSINESS RULE -see below BOTH 1 & 2 below ARE MANDATED REQUIREMENTS of the role and need to be uploaded into AVETTA as one document for this role: 1. A copy of the required Site Authorisation – Relevant Experience Evidence Form can be downloaded here The supplier company will be required to reach out to their site contact directly providing the above form (with contractor to complete section completed) + evidence of at least 3 years relevant experience for their review. The authorised Yarwun site contact will then provide a signed copy of the Rio Tinto Site Authorisation Form back to the supplier company. The supplier company should upload a copy of the completed form WITH all supporting evidence for this requirement and submit for Avetta review who will assess the documentation against the following points: Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) The site authorisation form approvers name, sign and date fields must be completed for each of the following: Contract Owner, CMT Superintendent Result must show: Evidence Accepted At least one additional supporting evidence page outside of the site authorisation form is included within the uploaded file. PLUS 2. MUST HAVE tested and certified to ASME Section IX. Coded welders are tested and then re-validated 6 monthly by a certified Cert. 10 welding supervisor, also must be experienced in boiler tube welding – see example of certification required. BOTH 1 & 2 MUST BE UPLOADED IN AS ONE CONTINUOUS DOCUMENT. NOTE: INDUSTRY SKILLED WELDER CODED ROLE WILL EXPIRE AFTER 6 MONTHS OF COMPLETION OF ASME IX TEST IF NOT RENEWED.	ASME Issue Date to be recorded : The latest date of sign-off in the client approval table of the form Expiry Date: 6 months from issue date	Relevant experience form: Image Added ASME example: Image Added
Welder.–Industry Skilled Boiler Tube	INDUSTRY SKILLED – Traceable experience as a BOILER TUBE WELDER for at least 3 years (verified by written evidence – resume and referee, responsibility of the employer) PLUS MUST HAVE Tested and certified to ASME IX. Boiler tube welders are tested and then re-validated 6 monthly by a certified Cert. 10 welding supervisor – see example of certification required. BOTH 1 & 2 below ARE MANDATED REQUIREMENTS of the role and need to be uploaded into AVETTA as one document for this role: 1. A copy of the required Site Authorisation – Relevant Experience Evidence Form can be downloaded here The supplier company will be required to reach out to their site contact directly providing the above form (with contractor to complete section completed) + evidence of at least 3 years relevant experience for their review. The authorised Yarwun site contact will then provide a signed copy of the Rio Tinto Site Authorisation Form back to the supplier company. The supplier company should upload a copy of the completed form WITH all supporting evidence for this requirement and submit for Avetta review who will assess the documentation against the following points: Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) The site authorisation form approvers name, sign and date fields must be completed for each of the following: Contract Owner, CMT Superintendent Result must show: Evidence Accepted At least one additional supporting evidence page outside of the site authorisation form is included within the uploaded file. PLUS 2. MUST HAVE tested and certified to ASME Section IX. Boiler Tube welders are tested and then re-validated 6 monthly by a certified Cert. 10 welding supervisor – see example of certification required. BOTH 1 & 2 MUST BE UPLOADED IN AS ONE CONTINUOUS DOCUMENT. NOTE: INDUSTRY SKILLED WELDER CODED ROLE WILL EXPIRE AFTER 6 MONTHS OF COMPLETION OF ASME IX TEST IF NOT RENEWED.	ASME Issue Date to be recorded : The latest date of sign-off in the client approval table of the form Expiry Date: 6 months from issue date	Relevant experience example: Image Added ASME EXAMPLE: Image Added
Certificate.Accreditation.Ultrasonic Impact Treatment accreditation	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)	Issue Date = Date of completion Expiry Date = No expiry date to be entered	Image Added
Site.-.NDT; AINDT or PCN Accreditation Level 1	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 1' being explicitly nominated. Evidence must be issued by either AINDT, BINDT or PCN	Issue Date = As shown on the document Expiry Date = As shown on the document	Image Added Image Added
Site.-.NDT; AINDT or PCN Accreditation Level 2	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 2' being explicitly nominated. Evidence must be issued by either AINDT, BINDT or PCN	Issue Date = As shown on the document Expiry Date = As shown on the document	Image Added Image Added Image Added
Site.-.NDT; AINDT or PCN Accreditation Level 3	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 3' being explicitly nominated. Evidence must be issued by either AINDT, BINDT or PCN	Issue Date = As shown on the document Expiry Date = As shown on the document	Image Added

Expand

title	Site Based Assessments

Anchor

	NDTandWeldingRTAY
	NDTandWeldingRTAY

Onsite "ChristopherWilWilliam"

Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"

The following evidence can be accepted:
- RTAY Recognition of Prior Competency
- Rio Tinto Record of Completion
- Theory Assessment or Site Authorisation
  All assessment pages within upload
  Matching competency name and code (if with checkbox, this should be completed)
  Applicant's signature and signed date
  Assessor's complete name, signature, and date
  Must show that the person is competent and authorised to operate

NOTE:

If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed
If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate
The learning and development section of the form does not need to be completed

Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date.

Expiry date = 2 years from issue date

Image Removed

Competency Name	Competency Requirements	Upload Requirements	Examples
Welder.-.RTAY Welding General - THEORY; 31415698	First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Theory Assessment or Site Authorisation All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) Applicant's signature and signed date Assessor's complete name Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate The learning and development section of the form does not need to be completed	Issue date = Course date as indicated on the form Expiry date = 99 years from issue date	Image Added Image Added
Welder.-.RTAY Welding General Purpose GMAW; 31260273	First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Theory Assessment or Site Authorisation All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) Applicant's signature and signed date Assessor's complete name, signature, and date Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate The learning and development section of the form does not need to be completed	Issue date = Record the course completion date or assessment date as issue date Expiry date = 2 years from issue date	Image Added
Welder.-.RTAY Welding General Purpose GTAW; 31260274
Welder.-.RTAY Welding General Purpose MMAW; 31108073
Welder.-.RTAY Welding Pressure Welding FCAW; 31260276
Welder.-.RTAY Welding Pressure Welding GMAW; 31260275
Welder.-.RTAY Welding Pressure Welding MMAW; 31108226
RTAY Welding Pressure Welding GTAW 31279701
Welder.-.RTAY Welding Structural FCAW; 31260553
Welder.-.RTAY Welding Structural GMAW; 31260552
Welder.-.RTAY Welding Structural MMAW; 31108075
Site.-.RTAY EI Radiation NDT Coordinator	Rule to be confirmed by client
Site.-.RTAY NDT Test Plate Proficiency Level 1	First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Site Authorisation All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) Applicant's signature and signed date Assessor's complete name, signature, and date Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed The learning and development section of the form does not need to be completed If evidence shows completion of a 'higher level' such as level 3, this can be accepted against the 'lower level' competencies such as level 1 and level 2.	Issue date = Record the course completion date or assessment date as issue date Expiry date = 50 years from issue date	Image Added
Site.-.RTAY NDT Test Plate Proficiency Level 2	First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Site Authorisation All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) Applicant's signature and signed date Assessor's complete name, signature, and date Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed The learning and development section of the form does not need to be completed If evidence shows completion of a 'higher level' such as level 3, this can be accepted against the 'lower level' competencies such as level 1 and level 2.	Issue date = Record the course completion date or assessment date as issue date Expiry date = 50 years from issue date	Image Added
Site.-.RTAY NDT Magnetic Particule Testing (MT) Level 1	First and last name must match applicant's name in Onsite the system Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior CompetencyTheory Assessment or Rio Tinto Record of Completion Site Authorisation showing: All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency The L1 MT qualification will be ticked on the form Applicant's signature and signed date will be completed Assessor's complete name , signature, and date Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate , signature, and date will be completed Must show that the person is competent and authorised to operate NOTE: The learning and development section of the form does not need to be completed	Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, date = use the assessor's signature date. Expiry date = 99 50 years from issue date
WelderSite.-.RTAY Welding General Purpose GMAW; 31260273NDT Magnetic Particule Testing (MT) Level 2	First and last name must match applicant's name in	the system Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of	"William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "	Mohd" instead of "
Welder.-.RTAY Welding General Purpose GTAW; 31260274
Welder.-.RTAY Welding General Purpose MMAW; 31108073
Welder.-.RTAY Welding Pressure Welding FCAW; 31260276
Welder.-.RTAY Welding Pressure Welding GMAW; 31260275
Welder.-.RTAY Welding Pressure Welding MMAW; 31108226
Welder.-.RTAY Welding Structural FCAW; 31260553
Welder.-.RTAY Welding Structural GMAW; 31260552
Welder.-.RTAY Welding Structural MMAW; 31108075
Site.-.RTAY EI Radiation NDT Coordinator	Rule to be confirmed by client	Site.-.RTAY NDT Test Plate Proficiency Level 1 Raza Hasan Mohd" The following evidence can be accepted: Site Authorisation showing: All assessment pages within upload NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency The L2 MT qualification will be ticked on the form Applicant's signature and signed date will be completed Assessor's complete name, signature, and date will be completed Must show that the person is competent and authorised to operate NOTE: The learning and development section of the form does not need to be completed	Issue date = use the assessor's signature date. Expiry date = 50 years from issue date
Site.-.RTAY NDT Penetrant Testing (PT) Level 1	First and last name must match applicant's name in the system Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: Site Authorisation showing: All assessment pages within upload NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency The L1 PT qualification will be ticked on the form Applicant's signature and signed date will be completed Assessor's complete name, signature, and date will be completed Must show that the person is competent and authorised to operate NOTE: The learning and development section of the form does not need to be completed	Issue date = use the assessor's signature date. Expiry date = 50 years from issue date
Site.-.RTAY NDT Penetrant Testing (PT) Level 2	First and last name must match applicant's name in Onsite the system Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Site Authorisation showing: All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency The L2 PT qualification will be ticked on the form Applicant's signature and signed date will be completed Assessor's complete name, signature, and date will be completed Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed The learning and development section of the form does not need to be completedIf evidence shows completion of a 'higher level' such as level 3, this can be accepted against the 'lower level' competencies such as level 1 and level 2. need to be completed	Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date. Expiry date = 50 years from issue date Image Removed Image Removed
Site.-.RTAY NDT Test Plate Proficiency Ultrasonic Testing (UT) Level 2	First and last name must match applicant's name in Onsite the system Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Site Authorisation showing: All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency The L2 UT qualification will be ticked on the form Applicant's signature and signed date will be completed Assessor's complete name, signature, and date will be completed Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed The learning and development section of the form does not need to be completed If evidence shows completion of a 'higher level' such as level 3, this can be accepted against the 'lower level' competencies such as level 1 and level 2.	Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date. Expiry date = 50 years from issue date Image Removed
Site.-.RTAY NDT Test Plate Proficiency Level 3 Ultrasonics Thickness Testing (UTT) Level 1	First and last name must match applicant's name in Onsite the system Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Site Authorisation showing: All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) Skill name will show as either Rio Tinto Yarwun NDT Testing Verification or Rio Tinto Yarwun NDT Test Plate Proficiency The L1 UTT qualification will be ticked on the form Applicant's signature and signed date will be completed Assessor's complete name, signature, and date will be completed Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed The learning and development section of the form does not need to be completed	Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date. Expiry date = 50 years from issue date

Versions Compared

Old Version 47

New Version Current

Key