Rio Tinto Aluminium | Individual Business Rules | NDT and Welding

Nationally Accredited Training

Competency Name	Competency Requirements	Upload Requirements
Boilermaker.Trade.Qualification - Boilermaker	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Samples of Accepted document types: Apprenticeship Certificate Certificate of Proficiency Certificate of Completion Certificate III Australian Recognised Trade Certificate Samples of Accepted Course Titles / Coding: Engineering Tradesperson (Fabrication) Engineering Tradesperson (Fabrication) (Boilermaking) Engineering / Fabrication Trade Engineering Fabrication Trade (Heavy Fabrication - Boilermaking) Engineering Construction (Welding - Pipework) Welder, First Class (Boilermaking) MEM30319 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au) Samples of Course Titles / Coding that must be escalated for client review / sign-off: Engineering Tradesperson Must be an Australian issued qualification - international qualifications are not accepted. Black and white or colour acceptable Must be clearly scanned and legible	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Welder.Certificate.Welding Supervisor	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will be a certificate showing completion of 'Welding Supervisor' course referencing standards AS 2214-2004 Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Welder.-.WTIA Licence - AS2214 Welding Supervisor	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will be a licence showing completion of 'Welding Supervisor' course referencing standards AS 2214-2004 Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Welder.Course.Certified Welding Inspector	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will be a certificate or card showing completion of 'Welding Inspector' or 'Welding Supervisor' Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Welder.Trade.Qualification - Welding (First Class)	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Samples of Accepted document types: Australian Recognised Trade Certificate Samples of Accepted Course Titles / Coding: Welder, First Class (Boilermaking) Sheet Metal (First Class) Must be an Australian issued qualification - international qualifications are not accepted. Black and white or colour acceptable Must be clearly scanned and legible	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Certificate.Accreditation.Ultrasonic Impact Treatment accreditation	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable)	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Site.-.NDT; AINDT or PCN Accreditation Level 1	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 1' being explicitly nominated. Evidence must be issued by either AINDT or PCN	Issue Date = As shown on the document Expiry Date = As shown on the document
Site.-.NDT; AINDT or PCN Accreditation Level 2	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 2' being explicitly nominated. Evidence must be issued by either AINDT or PCN	Issue Date = As shown on the document Expiry Date = As shown on the document
Site.-.NDT; AINDT or PCN Accreditation Level 3	Applicants name on the document must match name in the system (however shortened versions such as 'Chris' for 'Christopher' are acceptable) Evidence will show recognition of Non Destructive Testing (also referred to as ISO 9712) with 'Level 3' being explicitly nominated. Evidence must be issued by either AINDT or PCN	Issue Date = As shown on the document Expiry Date = As shown on the document

Site Based Assessments

Competency Name	Competency Requirements	Upload Requirements
Welder.-.RTAY Welding General - THEORY; 31415698	First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Theory Assessment or Site Authorisation All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) Applicant's signature and signed date Assessor's complete name, signature, and date Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate The learning and development section of the form does not need to be completed	Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date. Expiry date = 99 years from issue date
Welder.-.RTAY Welding General Purpose GMAW; 31260273	First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Theory Assessment or Site Authorisation All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) Applicant's signature and signed date Assessor's complete name, signature, and date Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate The learning and development section of the form does not need to be completed	Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date. Expiry date = 2 years from issue date
Welder.-.RTAY Welding General Purpose GTAW; 31260274
Welder.-.RTAY Welding General Purpose MMAW; 31108073
Welder.-.RTAY Welding Pressure Welding FCAW; 31260276
Welder.-.RTAY Welding Pressure Welding GMAW; 31260275
Welder.-.RTAY Welding Pressure Welding MMAW; 31108226
Welder.-.RTAY Welding Structural FCAW; 31260553
Welder.-.RTAY Welding Structural GMAW; 31260552
Welder.-.RTAY Welding Structural MMAW; 31108075
Site.-.RTAY EI Radiation NDT Coordinator	Rule to be confirmed by client
Site.-.RTAY NDT Test Plate Proficiency Level 1	First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Wil" instead of "William" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" The following evidence can be accepted: RTAY Recognition of Prior Competency Rio Tinto Record of Completion Theory Assessment or Site Authorisation All assessment pages within upload Matching competency name and code (if with checkbox, this should be completed) Applicant's signature and signed date Assessor's complete name, signature, and date Must show that the person is competent and authorised to operate NOTE: If Site Authorisation, the RCC Assessment or CTO Assessment section must be completed If Theory Assessment, when RCC is completed, the authorised leader is required to verify with a signature that the applicant is authorised to operate The learning and development section of the form does not need to be completed If evidence shows completion of a 'higher level' such as level 3, this can be accepted against the 'lower level' competencies such as level 1 and level 2.	Issue date = If a certificate has been provided, use the course completion date as issue date. If Theory Assessment or Site Authorisation, use the assessor's signature date. Expiry date = 50 years from issue date
Site.-.RTAY NDT Test Plate Proficiency Level 2
Site.-.RTAY NDT Test Plate Proficiency Level 3