- Created by Anika McEvoy, last modified by Cindy Richardson on Nov 27, 2019
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 42 Next »
Competency | Competency Requirements | Upload Requirements | Example Documents |
---|---|---|---|
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 1 |
|
| |
Electrical.Licence – QLD |
|
| |
Electrical.Licence.A Grade - ACT |
|
| |
Electrical.Licence.A Grade - VIC |
|
| |
Electrical.Licence.A Grade - TAS |
|
| |
Electrical.Licence.A Grade - SA |
|
| |
Electrical.Licence.A Grade - WA |
|
| |
Electrical.Licence.A Grade – NT |
|
| |
Electrical.Licence.NSW |
|
| |
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 1 |
| Expiry date in Onsite should be recorded as the date which is shown on the Licence If registration letter is uploaded No expiry date required | |
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 2 |
| Expiry date in Onsite should be recorded as the date which is shown on the Licence If registration letter is uploaded No expiry date required | |
Company.Induction.Ausgrid Accredited Service Provider LVL2 Authorisation | Ausgrid Certificate of Completion is accepted. It must show:
| Record the Issue date within Onsite: Issue date - If only an issue date is listed please enter this as the issue date
| |
Company.Induction.Ausgrid Accredited Service Provider LVL1 Authorisation | Ausgrid Certificate of Completion is accepted. It must show:
| Record the Issue date within Onsite: Issue date - If only an issue date is listed please enter this as the issue date
|
Competency | Competency Requirements | Upload Requirements | Example Documents |
---|---|---|---|
Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near |
|
| |
Electrical.Statement of Attainment.ICTCBL2136B - Install, maintain and modify customer premises |
|
| |
Electrical.Statement of Attainment.ICTOHS2153B - Work Safely Near Power Infrastructure |
|
| |
Electrical.Statement of Attainment.Electrical Equipment in Hazardous Areas |
|
| |
Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near |
|
| |
Electrical.Statement of Attainment.Testing of connections to low voltage electricity networks - UETTDRRF11A |
|
| |
Electrical.Statement of Attainment.Apply ESI safety rules, COP and procedures for electrical apparatus work - UETTDRRF01B |
|
| |
Electrical.Statement of Attainment.UEENEEP012A - Disconnect/reconnect composite appliances connected to low voltage installation wiring |
|
| |
Electrical.Trained.TasNetworks - Instructed Person |
|
| |
Electrical.Trained.TasNetworks - Person In Charge |
|
| |
Electrical.Trained.TasNetworks - Level 1 & 2 |
|
| |
Electrical. Statement of Attainment.Power System Meter Install |
DOCUMENT MUST STATE EITHER
NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code |
Competency | Competency Requirements | Upload Requirements | Example Documents |
---|---|---|---|
Electrical.Certificate IV.Instrumentation – Electrical |
|
| |
Electrical.Qualified.Energy Safe Victoria - Electrical Spotter |
|
| |
Electrical.Certificate.Electrical Safety in Water Industry |
|
| |
Electrical.Trade.Electrical Fitter (Instruments) |
|
| |
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing | Applicants name to be shown on documentation | Record the Issue date within Onsite: | |
Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution Overhead (Linesman) | Applicants name to be shown on documentation | Record the Issue date within Onsite: |
- No labels