Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 34
Next »
Licences
Competency | Competency Requirements | Upload Requirements | Example Documents |
---|
Electrical.Licence.A Grade – QLD | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in QLD
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - ACT | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in ACT
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - VIC | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in VIC
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - TAS | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in TAS
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - SA | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in SA
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade - WA | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in WA
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.A Grade – NT | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in NT
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Licence.NSW | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Licence showing Electrician to be uploaded
- Full licence or restricted licence accepted
- Must be issued by relevant state Government Authority in NSW
- Black and white or coloured copy of the document is accepted
| - Expiry date in Onsite should be recorded as the date which is shown on the Licence
| |
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 1 | | Expiry date in Onsite should be recorded as the date which is shown on the Licence | |
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 2 | | Expiry date in Onsite should be recorded as the date which is shown on the Licence | |
Statement of Attainment
Competency | Competency Requirements | Upload Requirements | Example Documents |
---|
Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- The matching competency code needs to be shown
- Statement of Attainment must be issued by a registered training organisation (RTO)
- No expiry date is required for this competency upload.
| - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.ICTCBL2136B - Install, maintain and modify customer premises | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- The matching competency code needs to be shown
- Statement of Attainment must be issued by a registered training organisation (RTO)
- No expiry date is required for this competency upload.
| - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.ICTOHS2153B - Work Safely Near Power Infrastructure | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- The matching competency code needs to be shown
- Statement of Attainment must be issued by a registered training organisation (RTO)
- No expiry date is required for this competency upload.
| - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.Electrical Equipment in Hazardous Areas | | - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near | | - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.Testing of connections to low voltage electricity networks - UETTDRRF11A | | - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.Apply ESI safety rules, COP and procedures for electrical apparatus work - UETTDRRF01B | | - The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
| |
Electrical.Statement of Attainment.UEENEEP012A - Disconnect/reconnect composite appliances connected to low voltage installation wiring | - Name on certificate to match the person registered
- Statement of Attainment in UEENEEP012A - Disconnect/reconnect composite appliances connected to low voltage installation wiring to be listed
- Issued by an RTO / Nationally Recognised Training logo
- No expiry
- Black and white or colour is acceptable
| - Only issue date to be recorded
| |
Electrical.Trained.TasNetworks - Instructed Person | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- Must be delivered by TasNetworks
- Must display Instructed Person or Instructed Person Refresher
| - Issue date recorded as per the certificate
- Expiry date – two years from issue date
| |
Electrical.Trained.TasNetworks - Person In Charge | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- Must be delivered by TasNetworks
- Must display Instructed Person in Charge or Person in Charge Refresher
| - Expiry and issue date recorded as per the certificate
| |
Electrical.Trained.TasNetworks - Level 1 & 2 | - The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
- Must be delivered by TasNetworks
- Must display Level 1 & 2 or Level 1 & 2 Refresher
| - Expiry and issue date recorded as per the certificate
| |
Certificate
Competency | Competency Requirements | Upload Requirements | Example Documents |
---|
Electrical.Certificate IV.Instrumentation – Electrical | - Name on certificate to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- Certificate IV in UEE40410 - Instrumentation – Electrical or Certificate IV in UEE40411 - Instrumentation – Electrical to be listed
- No expiry
- Black and white or colour acceptable
| - The Issue date in Onsite should be recorded
| |
Electrical.Qualified.Energy Safe Victoria - Electrical Spotter | - Applicants name on document to match applicants name in Onsite (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- Must list 'Spotter Registration Certificate'
- Must be issued by Energy Safe Victoria
- Must show the Energy Safe Victoria logo
| - Issue date to be recorded as per certificate / card
- Expiry = 3 years from Issue Date
| |
Electrical.Certificate.Electrical Safety in Water Industry | - Applicants name on document to match applicants name in Onsite (However shortened first names such as 'Chris' for 'Christopher' are accepted)
- Document WTR-TR-601B – Electrical Safety Training- Competency Assessment to be attached
| - The Issue date in Onsite should be recorded as the date of assessment
| |
Electrical.Trade.Electrical Fitter (Instruments) | - Name on certificate to match the person registered
- Certificate in Electrical Fitter (Instruments) to be listed
Black and white or colour acceptable Must be clearly scanned and legible Issue date to be recorded No Expiry
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
| |