Utilities Management Business Rules | TransGrid | Individual | Trade | Electrical

Certificates

Competency Name	Competency Requirements	Upload Requirements
Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work	When Licence is uploaded: Applicants name to be displayed on uploaded evidence and to match applicants registered name ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed Screenshots from websites are not accepted - Must be copy of the Licence Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted When Invoice (For new contractor Licence) has been uploaded: Applicants name to be displayed on uploaded evidence and to match applicants registered name ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed Date of receipt to be displayed on the invoice Contractor number to be displayed on document Must be issued by relevant state government authority Black and white or coloured copy of evidence can be accepted	Avetta verifiers click here for additional business rule information prior to verification of this competency When Licence is uploaded: Expiry Date = The date of expiration on the evidence When Invoice (For new contractor Licence) has been uploaded: The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
Electrical.Certificate III.Engineering - Electrical/Electronic Trade	Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher) A qualification issued by a Register Training Organisation (RTO) The qualification must be a Certificate III. The qualification must show: MEM30205 Certificate III in Engineering - Mechanical	Issue Date = Date of completion shown on certificate No expiry date is required
Electrical.Certificate III.Engineering - Industrial Electrician	Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher) A qualification issued by a Register Training Organisation (RTO) The qualification must be a Certificate III	Issue Date = Date of completion shown on certificate No expiry date is required
Electrical.Certificate III.Certificate III in Electrotechnology Electrician	Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course codes: UEE30811 UTE31199 Document / Certificate / Number No expiry Note: Evidence of Qualification.Licence.Electrical or Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work is accepted as evidence. To be awarded either licence required the applicant to provide evidence of current or equivalent qualification to NSW Fair Trading.	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Certificate II in ESI -Asset Inspection and Testing	Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher) A qualification issued by a Register Training Organisation (RTO) The qualification must be a Certificate II The qualification must show: Certificate II in ESI – Asset Inspection and Testing or be listed as a superseded certificate as per https://training.gov.au/Training/Details/UET20621	Issue Date = Date of completion shown on certificate
Qualification.Certificate III.Light Vehicle Mechanical Technology	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Qualification code and name. Acceptable codes and names are: AUR30620 (or older) – Certificate III in Light Vehicle Mechanical Technology AUR31520 (or older)– Certificate III in Automotive Diesel Engine Technology AUR30320 (or older)– Certificate III in Automotive Electrical Technology AUR32518 (or older) – Certificate III in Automotive Underbody Technology AUR31420 (or older) – Certificate III in Automotive Diesel Fuel Technology AUR32721 – Certificate III in Automotive Electric Vehicle Technology AUR31316 (or older) – Certificate III in Automotive Engine Reconditioning AUR31220 (or older) – Certificate III in Mobile Plant technology AUR30720 (or older) Certificate III in Motor Sport Technology AUR30405 (or older)– Certificate III in Automotive Mechanical Technology (Light Vehicle) MSM31022 (or older) – Certificate III in Recreational Vehicle Service and repair NOTE: Qualification code that is shown in competency naming convention must be shown on evidence Or any previous superseded equivalent qualification codes (which are indicated by changes in the last two numbers which relate to the Training Package update year eg. AUR30405 means it is the 2005 update version), shown against the mapping of this course on training.gov.au Date of completion or issue date must be shown Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s Click HERE for Internal Process on acceptance of superseded unit of competency NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LS” code, as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is not required

Licence

Competency Name

Competency Requirements

Upload Requirements

Qualification.Licence.Electrical

Name on Electrical Licence to match the person registered

Accepted form/s of evidence:

Electrical contractor licence
Supervisor certificate licence showing 'Q' can be accepted
New Zealand Electrical licence listing 'Inspector'
New Zealand practicing licence listing 'Electrician'
Screen shot showing that the licence is current for an interim period of 4 weeks and then the licence needs to be supplied

Must be issued by nominated / relevant government department based on state of issue and reflect the corresponding logo

Avetta verifiers click here for additional business rule information prior to verification of this competency

Expiry date to be recorded as shown on licence

Statement of Attainment

Competency Name	Competency Requirements	Upload Requirements
Electrical.Statement of Attainment.- Perform Pole Top Rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document Accepted Unit[s] of competency code and name: UETDRMP006 - Perform pole top rescue UETDRRF003 - Perform pole top rescue UETTDRRF02 - Perform pole top rescue UETTDRRF02B - Perform pole top rescue UETTDRRF02A - Perform pole top rescue o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment - Perform EWP rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document Accepted Unit[s] of competency code and name: UETDRRF002 - Perform EWP rescue UETDRMP005 - Perform elevated work platform rescue UETTDRRF03 - Perform EWP rescue o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment.- Perform tower rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Accepted Unit[s] of competency code and name: UETDRMP009 - Perform tower rescue UETDRRF006 - Perform tower rescue UETTDRRF04 - Perform tower rescue UETTDRRF04B - Perform tower rescue UETTDRRF04A - Perform tower rescue Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment.- Perform Rescue from Switchyard Structures	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted Accepted Unit[s] of competency code and name: UETDRMP008 - Perform rescue from switchyard structures UETDRRF005 - Perform rescue from switchyard structures at heights UETTDRRF05 - Perform rescue from switchyard structures at heights UETTDRRF05B - Perform rescue from switchyard structures at heights UETTDRRF05A - Perform rescue from switchyard structures at heights	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment Perform rescue from a live LV panel	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: - RTO Name, Code and Logo - Units of competency code and name, date completed -Date certificate issued -Authorised person name or title (does not necessarily need a signature) -Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number -Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) ·Accepted also is a spreadsheet from Essential Energy - This will show Essential Energy as the Organisation, Given Name, Surname, Completion date and course details RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted · Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date · Expiry date is 13 months from date of training completion Accepted Unit[s] of competency code and name: UETDRMP007 - Perform rescue from a live low voltage panel UETDRRF004 - Perform rescue from a live LV panel UETTDRRF06 - Perform rescue from a live LV panel UETTDRRF06B - Perform rescue from a live LV panel UETTDRRF06A - Perform rescue from a live LV panel **RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 13 months from date of training completion
Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment.- Perform EWP controlled descent escape	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document Accepted Unit[s] of competency code and name: UETTDRRF08 - Perform EWP controlled descent escape UETDRMP004 - Perform elevated work platform controlled descent escape UETTDRRF08B - Perform EWP controlled descent escape UETTDRRF08A - Perform EWP controlled descent escape o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response procedures	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Accepted course codes: UETTDREL13 - Comply with environmental and incidental response procedures UETDREL002 - Comply with environmental requirements Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Accepted course codes: UETTDREL14 UETDREL006 Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.Work safely in the vicinity of live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Accepted Unit[s] of competency code and name: UETDREL005 - Work safely in the vicinity of live electrical apparatus UETTDREL16 - Working safely near live electrical apparatus UETTDREL16A - Working safely near live electrical apparatus Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.ESI safety rules for work on, near or in the vicinity of electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Accepted Unit[s] of competency code and name: UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus UETTDRRF01B - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus UETTDRRF01A - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment- First Aid in an ESI Environment	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted NOTE: The following unit codes are accepted: UETTDRRF10 - Provide first aid in an ESI environment UETDRRF007 - Provide first aid in an ESI environment UETDRMP010 - Provide first aid in an ESI environment	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Certificate.UETTDRRF11 - Testing of connections to low voltage electricity networks	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC25 – Use EWP to cut above ground vegetation near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC26 – Cut vegetation at ground near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC31 – Operate specialised plant & equipment at ground level near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical appara	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC34A - Undertake release and rescue from a tree near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.AHCARB204A - Undertake standard climbing techniques	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted. NOTE: AHCARB322 supersedes and is equivalent to AHCARB312 and AHCARB204A - Use Standard climbing techniques to access trees.	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.AHCPCM201A - Recognise plants	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.TLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.Apply work health and safety regulations, codes and practices in the workplace	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Accepted Unit[s] of competency code and name: UEECD0007 - Apply work health and safety regulations, codes and practices in the workplace UEENEEE001B - Apply OHS practices in the workplace UEENEEE101A - Apply Occupational Health and Safety regulations, codes and practices in the workplace Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UUETTDREL13A - Comply with sustainability, environmental and incidental response policies and procedures	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.AHCARB205A - Operate and maintain chainsaws	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environment	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Certificate.UETTDRDP14A - Maintain energised HV distribution overhead electrical apparatus (glove)	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Certificate.UETTDRDP13A - Maintain energised HV distribution overhead electrical apparatus (stick)	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Transgrid approved evidence training	Competency must be escalated externally to Transgrid to review/approve under all circumstances	Issue Date = Determined by Transgrid Expiry Date = Determined by Transgrid
Electrical.Certificate.III or IV in Electronics and Communications	Name on Degree to match the person registered Bachelor Degree in Electrical Engineering to be listed No expiry Black and white or colour is acceptable	Issue date to be recorded
Electrical.Diploma.or Degree Electrical Engineering	Name on Degree to match the person registered Bachelor Degree in Electrical Engineering to be listed No expiry Black and white or colour is acceptable	Issue date to be recorded
Electrical.Certificate.III or IV in Telecommunications Technology	Name on certificate must match name in system Certificate of proficiency in Electrical qualification to be listed No expiry Must be legible	Issue date to be recorded