Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 2
Next »
Building
| Competency | Competency Requirements | Upload Requirements | Examples |
|---|
| Tradesperson.Qualified.Building Trade Qualifications | When certificate is uploaded:
- Australian** Recognised Training Institution name must be displayed on document
- Applicant name on certificate to match the name in the system
- Completion date or issue date must be displayed on the certificate
- Course title to be listed on certificate to match the nominated coding and title within Onsite
- Document / Certificate / Number to be shown
- No expiry
When trade licence is uploaded: - Contractor License and Supervisor License can be accepted as evidence of Building Trade Qualification providing it has the persons name, date and license number and is issued by relevant Australian State Government Authority
**Internationally issued trade certificates / Licences cannot be accepted unless accompanied by a letter from an Australian RTO recognising the qualification | When certificate is uploaded: - Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When trade licence is uploaded: - Expiry date to be recorded within Onsite
| |
Electrical
| Competency | Competency Requirements | Upload Requirements | Examples |
|---|
| Tradesperson.Qualified.Electrical Trade Qualifications | When certificate is uploaded:
- Australian** Recognised Training Institution name must be displayed on document
- Applicant name on certificate to match the name in the system
- Completion date or issue date must be displayed on the certificate
- Course title to be listed on certificate to match the nominated coding and title within Onsite
- Document / Certificate / Number to be shown
- No expiry
When trade licence is uploaded: - Contractor License and Supervisor License can be accepted as evidence of Electrical Trade Qualification providing it has the persons name, date and license number and is issued by relevant Australian State Government Authority
**Internationally issued trade certificates / Licences cannot be accepted unless accompanied by a letter from an Australian RTO recognising the qualification | When certificate is uploaded: - Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When trade licence is uploaded: - Expiry date to be recorded within Onsite
| |
Fabrication
| Competency | Competency Requirements | Upload Requirements | Examples |
|---|
| Tradesperson.Qualified.Fabrication Trade Qualifications | When certificate is uploaded:
- Australian** Recognised Training Institution name must be displayed on document
- Applicant name on certificate to match the name in the system
- Completion date or issue date must be displayed on the certificate
- Course title to be listed on certificate to match the nominated coding and title within Onsite
- Document / Certificate / Number to be shown
- No expiry
When trade licence is uploaded: - Contractor License and Supervisor License can be accepted as evidence of FabricationTrade Qualification providing it has the persons name, date and license number and is issued by relevant Australian State Government Authority
**Internationally issued trade certificates / Licences cannot be accepted unless accompanied by a letter from an Australian RTO recognising the qualification | When certificate is uploaded: - Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When trade licence is uploaded: - Expiry date to be recorded within Onsite
| |
Mechanical
| Competency | Competency Requirements | Upload Requirements | Examples |
|---|
| Tradesperson.Qualified.Mechanical Trade Qualifications | When certificate is uploaded:
- Australian** Recognised Training Institution name must be displayed on document
- Applicant name on certificate to match the name in the system
- Completion date or issue date must be displayed on the certificate
- Course title to be listed on certificate to match the nominated coding and title within Onsite
- Document / Certificate / Number to be shown
- No expiry
When trade licence is uploaded: - Contractor License and Supervisor License can be accepted as evidence of Mechanical Trade Qualification providing it has the persons name, date and license number and is issued by relevant Australian State Government Authority
**Internationally issued trade certificates / Licences cannot be accepted unless accompanied by a letter from an Australian RTO recognising the qualification | When certificate is uploaded: - Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When trade licence is uploaded: - Expiry date to be recorded within Onsite
| |
Other
| Competency | Competency Requirements | Upload Requirements | Examples |
|---|
Tradesperson.Qualified.Other Trade Qualifications** ** 'Other' is defined as any other Australian recognised trade qualification that is not one of the following: - Building
- Electrical
- Fabrication
- Mechanical
- Plumbing
| When certificate is uploaded:
- Australian** Recognised Training Institution name must be displayed on document
- Applicant name on certificate to match the name in the system
- Completion date or issue date must be displayed on the certificate
- Course title to be listed on certificate to match the nominated coding and title within Onsite
- Document / Certificate / Number to be shown
- No expiry
When trade licence is uploaded: - Contractor License and Supervisor License can be accepted as evidence of [Other] Trade Qualification providing it has the persons name, date and license number and is issued by relevant Australian State Government Authority
**Internationally issued trade certificates / Licences cannot be accepted unless accompanied by a letter from an Australian RTO recognising the qualification | When certificate is uploaded: - Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When trade licence is uploaded: - Expiry date to be recorded within Onsite
| |
Other
| Competency | Competency Requirements | Upload Requirements | Examples |
|---|
Tradesperson.Qualified.Plumbing Trade Qualifications | When certificate is uploaded:
- Australian** Recognised Training Institution name must be displayed on document
- Applicant name on certificate to match the name in the system
- Completion date or issue date must be displayed on the certificate
- Course title to be listed on certificate to match the nominated coding and title within Onsite
- Document / Certificate / Number to be shown
- No expiry
When trade licence is uploaded: - Contractor License and Supervisor License can be accepted as evidence of Plumbing Trade Qualification providing it has the persons name, date and license number and is issued by relevant Australian State Government Authority
**Internationally issued trade certificates / Licences cannot be accepted unless accompanied by a letter from an Australian RTO recognising the qualification | When certificate is uploaded: - Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When trade licence is uploaded: - Expiry date to be recorded within Onsite
| |