Utilities Management Business Rules | Ausgrid | Individual Business Rules | Electrical

Certificates

Competency	Competency Requirements	Upload Requirements
Network Operator.Certificate.Vegetation Worker In-field Audit	Ausgrid issued certificate: ‘CERTIFICATE OF INFIELD AUDIT COMPLIANCE’ Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. Business Name on Certificate to match the organisation registered. Documentation which has been found to be subject to alterations will not be accepted. The attached document can be accepted in the interim.	Issue Date = as per certification Expiry Date = 12 months after issue date Interim Document = 2 week validity period. i.e. expires 2 weeks after submitted
Electrical.Certificate of Attendance.Proof of attending the initial Electrical Safety Rules Course	For Pegasus LMS Issued Certificate: Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) *Certificate will show completion of: Electrical Safety Rules Initial* Certificate will show both Pegasus and Ausgrid Logos Date of completion will be shown For the Skills Passport: Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Must include either a page of the passport document that shows the applicants name OR include a copy of the applicant’s photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant Uploaded document must also include page of passport that shows all Ausgrid competencies – F01, F09 AND Environmental Awareness and/or ESR Initial as having been achieved with: Ausgrid / Energy Australia stamp being shown on this page Date of Training Trainer / Assessor Name Signature NOTE: From 28.10.2020 if there is a signed sticker instead of a stamp with the trainer’s name with the relevant competency listed, it can be approved:	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date NO EXPIRY DATE
Electrical.Certificate II.Asset Inspection and Testing	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment. Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UET20621 UET20619 UET20612 No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Certificate III.UEE30811 - Certificate III in Electrotechnology Electrician	Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course codes: UEE30811 UTE31199 Document / Certificate / Number No expiry	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Certificate III.UET30512 - Certificate III in ESI - Power Systems - Transmission Overhead	Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite Document / Certificate / Number No expiry For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution	Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course codes: UET30612 UET30206 UET30209 UETT30101 UTT30101 UTT30301 UET30619 UET30621 Electricity Supply Industry Distribution (Powerline) Document / Certificate / Number No expiry	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Certificate II in ESI - Powerline Vegetation Control	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UET20321 UET20319 UET20312 UET20110 UET20109 No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing	Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Accepted course code/s: UETTDRVC25 UTT30301 - Certificate III in ESI - Cable Jointing (Powerline) UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing Completion date or issue date must be displayed Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite Document / Certificate / Number No expiry For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work	Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite Document / Certificate / Number No expiry For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Certificate III. Certificate III in ESI - Distribution Underground	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UET30821 - Certificate III in ESI - Distribution Underground UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing UET30819 - Certificate III in ESI - Power Systems - Distribution Cable Jointing UET30409 - Certificate III in ESI - Cable Jointing UET30406 - Certificate III in ESI - Cable Jointing Electricity Supply Industry Cable Jointing (Power Line) Pegasus Document / Certificate / Number No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Perform a ground-based tree defect evaluation	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: AHCARB408 AHCARB403 No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none

Licences

Competency

Competency Requirements

Upload Requirements

Examples

Electrical.Licence.NSW

When Licence is uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ or similar to be listed
Screenshots from websites are not accepted - Must be copy of the Licence
Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
Black and white or coloured copy of evidence can be accepted
Supervisor licence can be accepted for the Electrical Contractor licence
Screenshots of valid Licence from mobile app or www.onegov.nsw.gov.au can be accepted

When Invoice (For new contractor Licence) has been uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ or similar to be listed
Date of receipt to be displayed on the invoice
Contractor number to be displayed on document
Must be issued by relevant state government authority
Black and white or coloured copy of evidence can be accepted
Screenshots of valid Licence from mobile app can be accepted but must be verified on the website https://www.onegov.nsw.gov.au/publicregister/#/publicregister/search/Trades

When Licence is uploaded:

Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Statement of Attainment

Competency	Competency Requirements	Upload Requirements	Examples
Electrical.Statement of Attainment.Booking confirmation Electrical Statement of Attainment - First Aid in an ESI Environment	When Booking Confirmation is Uploaded: This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training Applicants name to be shown on document RTO Name, Code and Logo Units of competency code and name, date booked for	For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
Electrical.Statement of Attainment- First Aid in an ESI Environment	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRRF007 UETTDRRF10 (Completion date must be prior to 20/09/2022) 12-month expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Issue date - If only an issue date is listed, please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).	Statement of Attainment: Skills Passport: SOA TAFE NSW
Electrical.Statement of Attainment.Booking confirmation – Testing of Connections to LV Electricity Networks	When Booking Confirmation is Uploaded: This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training Applicants name to be shown on document RTO Name, Code and Logo Units of competency code and name, date booked for	For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
Electrical.Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRDU015 UETTDRCJ26 UETTDRCJ26A UETTDRCJ06B UETTDRCJ06A Passport document showing stamp for Underground Services Cat 2 Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’ Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric' No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment – Testing of Connections to LV Electricity Networks	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW) NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code For the Skills Passport: Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant Uploaded document must also include page of passport that shows ‘UETTDRRF11 or UETTDRRF11A’ as having been achieved with: Ausgrid / Energy Australia stamp being shown on this page Date of Training Trainer / Assessor Name Signature	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation). Pegasus Staff click here to read additional crucial business rule information prior to file verification	SOA TAFE NSW
Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response procedures	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Statement of Attainment. Work safely in the vicinity of live electrical apparatus as a non-electrical worker	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDREL006 UETTDREL14 UETTDREL14A UETTDREL04B UETTDREL04A 12-month expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Issue date - If only an issue date is listed, please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).
Electrical.Statement of Attainment. Work safely in the vicinity of live electrical apparatus	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDREL005 UETTDREL16 UETTDREL16A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none Pegasus Staff click here to read additional crucial business rule information prior to file verification
Electrical.Statement of Attainment- Use asset inspection equipment	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment. Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRAI005 UETTDREL17 UETTDREL17A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details. NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatus	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work	For the Statement of Attainment or Transcript: Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Accepted units of competency: UETTDRRF01 - Issued by Aurecon is accepted. Please see the attached example. UETSS00019 UETSS00037 From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW) Additional BR information for ASP pending data only; Not Ausgrid Partners NOTE: All ASP1 authorisations - Ausgrid’s Electrical Safety Rules UETTDRRF01 training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2 authorisations - must complete their initial Ausgrid Electrical Safety Rules UETTDRRF01 training with Ausgrid’s Training Group. After the initial training, the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned Electrical Safety Rules UETTDRRF01 training. TAFE certificates supplied for ASP2 must state 800- 0326W Ausgrid ESR and course code UETTDRRF01 marked as satisfactory. Where an individual holds both Level 1 & Level 2 ASP authorisations, Ausgrid delivered Electrical Safety Rules UETTDRRF01 must be delivered through Ausgrid’s Training Group only Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid aligned version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code For the Skills Passport: Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant Uploaded document must also include page of passport that shows UETTDRRF01 or ESI Safety Rules or ESR as having been achieved with: Ausgrid / Energy Australia stamp being shown on this page Date of Training Trainer / Assessor Name Signature NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved: For Pegasus LMS Issued Certificate: Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher Certificate will show both Pegasus and Ausgrid Logos Date of completion will be shown	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation). Pegasus Staff click here to read additional crucial business rule information prior to file verification	SOA TAFE NSW
lectrical.Statement of Attainment - Perform Pole Top Rescue or Booking confirmation	When Booking Confirmation is Uploaded: This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training Applicants name to be shown on document RTO Name, Code and Logo Units of competency code and name, date booked for	For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
Electrical.Statement of Attainment - Perform Pole Top Rescue	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW) NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code For the Skills Passport: Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant Uploaded document must also include page of passport that shows ‘UETTDRRF02’ or 'UETDRRF003' as having been achieved with: Ausgrid / Energy Australia stamp being shown on this page Date of Training Trainer / Assessor Name Signature	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation). Pegasus Staff click here to read additional crucial business rule information prior to file verification	SOA TAFE NSW
Electrical.Statement of Attainment - LV Release & Rescue from an EWP or Booking confirmation	When Booking Confirmation is Uploaded: This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training Applicants name to be shown on document RTO Name, Code and Logo Units of competency code and name, date booked for	For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
Electrical.Statement of Attainment- LV Release & Rescue from an EWP	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRRF002 UETTDRRF03 (Completion date must be prior to 20/09/2022) 12-month expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Issue date - If only an issue date is listed, please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).	SOA TAFE NSW
Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue Or Booking confirmation	When Booking Confirmation is Uploaded: This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training Applicants name to be shown on document RTO Name, Code and Logo Units of competency code and name, date booked for	For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights Or Booking confirmation	When Booking Confirmation is Uploaded: This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training Applicants name to be shown on document RTO Name, Code and Logo Units of competency code and name, date booked for	For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Statement of Attainment.Booking confirmation - - Perform rescue from a live LV panel	When Booking Confirmation is Uploaded: This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training Applicants name to be shown on document RTO Name, Code and Logo Units of competency code and name, date booked for	For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
Electrical.Statement of Attainment. - Perform rescue from a live LV panel	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRRF004 UETTDRRF06 (Completion date must be prior to 20/09/2022) 12-month expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Issue date - If only an issue date is listed, please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).	SOA TAFE NSW
Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue or Booking confirmation	When Booking Confirmation is Uploaded: This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training Applicants name to be shown on document RTO Name, Code and Logo Units of competency code and name, date booked for	For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Statement of Attainment - CCD Release & Rescue from an EWP or Booking confirmation	When Booking Confirmation is Uploaded: This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training Applicants name to be shown on document RTO Name, Code and Logo Units of competency code and name, date booked for	For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
Electrical.Statement of Attainment UETTDRRF08B - CCD Release & Rescue from an EWP	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW) NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code For the Skills Passport: Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant Uploaded document must also include page of passport that shows ‘UETTDRRF08B’ as having been achieved with: Ausgrid / Energy Australia stamp being shown on this page Date of Training Trainer / Assessor Name Signature	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation). Pegasus Staff click here to read additional crucial business rule information prior to file verification	SOA TAFE NSW
Electrical.Statement of Attainment- Apply access procedures to work on or near electrical network infrastructure	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW) Additional BR information for ASP pending data only; Not Ausgrid Partners NOTE: All ASP1 authorisations - Ausgrid’s Electrical Safety Rules UETTDRRF09 training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised. NOTE: All ASP2 authorisations - must complete their initial Ausgrid Electrical Safety Rules UETTDRRF09 training with Ausgrid’s Training Group. After the initial training, the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned Electrical Safety Rules UETTDRRF09 training. TAFE certificates supplied for ASP2 must state 800- 0326W Ausgrid ESR and course code UETTDRRF09 marked as satisfactory. Where an individual holds both Level 1 & Level 2 ASP authorisations, Ausgrid delivered Electrical Safety Rules UETTDRRF09 must be delivered through Ausgrid’s Training Group only Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid aligned version of ‘UETTDRRF09 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code For the Skills Passport: Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant Uploaded document must also include page of passport that shows ‘UETTDRRF09 or UETTDRRF09B ’ or 'Apply Access Procedures' or 'Network Access Procedures' as having been achieved with: Ausgrid / Energy Australia stamp being shown on this page Date of Training Trainer / Assessor Name Signature For Pegasus LMS Issued Certificate: Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher Certificate will show both Pegasus and Ausgrid Logos Date of completion will be shown NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation). Pegasus Staff click here to read additional crucial business rule information prior to file verification	SOA TAFE NSW
Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from within the tree	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC006 UETTDRVC21 (Completion date must be prior to 20/09/2022) 12-month expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
Electrical.Statement of Attainment.UETTDRVC23 - Plan for the removal of vegetation up to veg exclusion zone near live electrical appar	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Statement of Attainment.Assess vegetation in an electricity supply industry environment	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC002 UETTDRVC24 UETTDRVC24A UETTDRVC04B UETTDRVC04A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from an elevated work platform	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC004 UETTDRVC25 (Completion date must be prior to 20/09/2022) 12-month expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Issue date - If only an issue date is listed, please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).
Electrical.Statement of Attainment.Control vegetation in the vicinity of live electrical apparatus from ground level	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment. Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC005 UETTDRVC26 No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Monitor vegetation control work in the vicinity of live electrical apparatus	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC009 UETTDRVC27 UETTDRVC27A UETTDRVC07B UETTDRVC07A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.UETTDRVC31 Operate specialised plant & equipment at ground level near live electrical apparatus	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical.Statement of Attainment.Use specialised plant to cut vegetation above ground in the vicinity of live electrical apparatus	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC011 UETTDRVC32 UETTDRVC32A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Electrical.Statement of Attainment.Perform rescue from within a tree in the vicinity of live electrical apparatus	Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC010 UETTDRVC34 (Completion date must be prior to 20/09/2022) 12-month expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE : Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Issue date - If only an issue date is listed, please enter this as the issue date Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).
Electrical.Statement of Attainment. Control vegetation using pruning techniques	For the Statement of Attainment or Transcript: Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted Course Titles / Codes: UETDRVC007 UETTDRVC33 UETTDRVC33A No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
Environmental.Statement of Attainment.AHCSAW201 - Conduct erosion and sediment control activities	For the Statement of Attainment or Transcript: Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note; the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Name of Applicant Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) There is no expiry date on a Statement of Attainment or Transcript. RTO registration must only have been current at the time of training completion / awarding the document Document verifier to ensure the Issue of this document is an RTO. NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Electrical. Certificate III. Certificate III in Electrotechnology Electrician	Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted. If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus. Documentation which has been found to be subject to alterations will not be accepted. RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment Recognised Training Institution’s name to be displayed on document. Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Completion date or issue date must be displayed Accepted course code/s: UEE30820 - Certificate III in Electrotechnology Electrician UEE30811 - Certificate III in Electrotechnology Electrician UEE30807 - Certificate III in Electrotechnology Electrician UTE31199 - Certificate III in Electrotechnology Systems Electrician No expiry Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements. For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR; Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification	The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none