Goodyear Chemicals- Asbestos

Owned by Zach Al-Sharif (Unlicensed)
Last updated: Feb 09, 2023 by Gracielle Molino
7 min read

Competency

Competency Requirements

Upload Requirements

Examples

Asbestos.Licence.Asbestos Abatement Class I & II

 

OSHA Reference: General Industry 1915.1001

(k) Communication of hazards (9) Employee information and training. (i) The employer shall train each employee who is likely to be exposed in excess of a PEL and each employee who performs Class I through IV asbestos operations in accordance with the requirements of this section. Training shall be provided at no cost to the employee. The employer shall institute a training program and ensure employee participation in the program. (ii) Training shall be provided prior to or at the time of initial assignment and at least annually thereafter. (iii) Training for Class I operations and for Class II operations that require the use of critical barriers (or equivalent isolation methods) and/or negative pressure enclosures under this section shall be the equivalent in curriculum, training method and length to the EPA Model Accreditation Plan (MAP) asbestos abatement workers training (40 CFR part 763, subpart E, appendix C).

Acceptable training documentation should include the following:

  • Subject/Topic of the Training

  • Instructor Name (for Safety Meeting/Toolbox Talk) OR Training Company Name (for certificate / refresher)

  • Employee First Name and Last Name

  • Employee Signature (Only required for Safety Meeting/Toolbox Talk)

  • Date

Training documentation can be in the form of a:

  • Certificate - Either issued internally by the employer company or by third party training organization

  • Safety Meeting/Toolbox Talk - Issued internally by the employer company

  • Refresher Training - Either issued internally by the employer company or by third party training organization

NOTE: The worker must be listed on the document as an attendee being trained. If the worker is listed as the trainer or the meeting supervisor, this CANNOT be accepted.

Avetta verifier please click here for additional business rule information

Issue Date = Date of training completion

Expiry Date = 1 year from date of training completion

 

Asbestos.Licence.Asbestos Abatement Class II

 

OSHA Reference: General Industry 1915.1001

(k) Communication of hazards (9) Employee information and training. (i) The employer shall train each employee who is likely to be exposed in excess of a PEL and each employee who performs Class I through IV asbestos operations in accordance with the requirements of this section. Training shall be provided at no cost to the employee. The employer shall institute a training program and ensure employee participation in the program. (ii) Training shall be provided prior to or at the time of initial assignment and at least annually thereafter. (iii) Training for Class I operations and for Class II operations that require the use of critical barriers (or equivalent isolation methods) and/or negative pressure enclosures under this section shall be the equivalent in curriculum, training method and length to the EPA Model Accreditation Plan (MAP) asbestos abatement workers training (40 CFR part 763, subpart E, appendix C).

Acceptable training documentation should include the following:

  • Subject/Topic of the Training

  • Instructor Name (for Safety Meeting/Toolbox Talk) OR Training Company Name (for certificate / refresher)

  • Employee First Name and Last Name

  • Employee Signature (Only required for Safety Meeting/Toolbox Talk)

  • Date

Training documentation can be in the form of a:

  • Certificate - Either issued internally by the employer company or by third party training organization

  • Safety Meeting/Toolbox Talk - Issued internally by the employer company

  • Refresher Training - Either issued internally by the employer company or by third party training organization

NOTE: The worker must be listed on the document as an attendee being trained. If the worker is listed as the trainer or the meeting supervisor, this CANNOT be accepted.

Avetta verifier please click here for additional business rule information

Issue Date = Date of training completion

Expiry Date = 1 year from date of training completion

 

Asbestos.Licence.Asbestos Abatement Class III

 

OSHA Reference: General Industry 1915.1001

(ii) For Class III and IV asbestos work, the qualified person shall be trained in aspects of asbestos handling appropriate for the nature of the work, to include procedures for setting up glove bags and mini-enclosures, practices for reducing asbestos exposures, use of wet methods, the contents of this standard, and the identification of asbestos. Such training shall include successful completion of a course that is consistent with EPA requirements for training of local education agency maintenance and custodial staff as set forth at 40 CFR 763.92(a)(2), or its equivalent in stringency, content, and length. Qualified persons for Class III and Class IV work may also be trained pursuant to the requirements of paragraph (o)(4)(i) of this section.

Acceptable training documentation should include the following:

  • Subject/Topic of the Training

  • Instructor Name (for Safety Meeting/Toolbox Talk) OR Training Company Name (for certificate / refresher)

  • Employee First Name and Last Name

  • Employee Signature (Only required for Safety Meeting/Toolbox Talk)

  • Date

Training documentation can be in the form of a:

  • Certificate - Either issued internally by the employer company or by third party training organization

  • Safety Meeting/Toolbox Talk - Issued internally by the employer company

  • Refresher Training - Either issued internally by the employer company or by third party training organization

NOTE: The worker must be listed on the document as an attendee being trained. If the worker is listed as the trainer or the meeting supervisor, this CANNOT be accepted.

Avetta verifier please click here for additional business rule information

Issue Date = Date of training completion

Expiry Date = 1 year from date of training completion

 

Asbestos.Licence.Asbestos Abatement Class IV

 

OSHA Reference: General Industry 1915.1001

(vi) Training for employees performing Class IV operations shall be consistent with EPA requirements for training of local education agency maintenance and custodial staff as set forth at 40 CFR 763.92(a)(1). Such a course shall include available information concerning the locations of thermal system insulation and surfacing ACM/PACM, and asbestos-containing flooring material, or flooring material where the absence of asbestos has not yet been certified; and instruction in the recognition of damage, deterioration, and delamination of asbestos containing building materials. Such a course shall take at least 2 hours.

Acceptable training documentation should include the following:

  • Subject/Topic of the Training

  • Instructor Name (for Safety Meeting/Toolbox Talk) OR Training Company Name (for certificate / refresher)

  • Employee First Name and Last Name

  • Employee Signature (Only required for Safety Meeting/Toolbox Talk)

  • Date

Training documentation can be in the form of a:

  • Certificate - Either issued internally by the employer company or by third party training organization

  • Safety Meeting/Toolbox Talk - Issued internally by the employer company

  • Refresher Training - Either issued internally by the employer company or by third party training organization

NOTE: The worker must be listed on the document as an attendee being trained. If the worker is listed as the trainer or the meeting supervisor, this CANNOT be accepted.

Avetta verifier please click here for additional business rule information

Issue Date = Date of training completion

Expiry Date = 1 year from date of training completion

 

Asbestos Abatement Competent Person Class I & II

 

OSHA Reference: General Industry 1915.1001

(4) Training for the competent person. (i) For Class I and II asbestos work the qualified person shall be trained in all aspects of asbestos removal and handling, including: Abatement, installation, removal and handling; the contents of this standard; the identification of asbestos; removal procedures, where appropriate; and other practices for reducing the hazard. Such training shall be obtained in a comprehensive course for supervisors, that meets the criteria of EPA’s Model Accredited Plan (40 CFR part 763, subpart E, Appendix C), such as a course conducted by an EPA-approved or state-approved training provider, certified by EPA or a state, or a course equivalent in stringency, content, and length.

Acceptable training documentation should include the following:

  • Subject/Topic of the Training

  • Instructor Name (for Safety Meeting/Toolbox Talk) OR Training Company Name (for certificate / refresher)

  • Employee First Name and Last Name

  • Employee Signature (Only required for Safety Meeting/Toolbox Talk)

  • Date

Training documentation can be in the form of a:

  • Certificate - Either issued internally by the employer company or by third party training organization

  • Safety Meeting/Toolbox Talk - Issued internally by the employer company

  • Refresher Training - Either issued internally by the employer company or by third party training organization

NOTE: The worker must be listed on the document as an attendee being trained. If the worker is listed as the trainer or the meeting supervisor, this CANNOT be accepted.

Avetta verifier please click here for additional business rule information

Issue Date = Date of training completion

Expiry Date = 1 year from date of training completion

 

Asbestos.Licence.Asbestos Abatement Competent Person Class III & IV

OSHA Reference: General Industry 1915.1001

(ii) For Class III and IV asbestos work, the qualified person shall be trained in aspects of asbestos handling appropriate for the nature of the work, to include procedures for setting up glove bags and mini-enclosures, practices for reducing asbestos exposures, use of wet methods, the contents of this standard, and the identification of asbestos. Such training shall include successful completion of a course that is consistent with EPA requirements for training of local education agency maintenance and custodial staff as set forth at 40 CFR 763.92(a)(2), or its equivalent in stringency, content, and length. Qualified persons for Class III and Class IV work may also be trained pursuant to the requirements of paragraph (o)(4)(i) of this section.

Acceptable training documentation should include the following:

  • Subject/Topic of the Training

  • Instructor Name (for Safety Meeting/Toolbox Talk) OR Training Company Name (for certificate / refresher)

  • Employee First Name and Last Name

  • Employee Signature (Only required for Safety Meeting/Toolbox Talk)

  • Date

Training documentation can be in the form of a:

  • Certificate - Either issued internally by the employer company or by third party training organization

  • Safety Meeting/Toolbox Talk - Issued internally by the employer company

  • Refresher Training - Either issued internally by the employer company or by third party training organization

NOTE: The worker must be listed on the document as an attendee being trained. If the worker is listed as the trainer or the meeting supervisor, this CANNOT be accepted.

Avetta verifier please click here for additional business rule information

Issue Date = Date of training completion

Expiry Date = 1 year from date of training completion

 

Asbestos.Licence.Asbestos Awareness

OSHA Reference: General Industry 29 CFR 1910.1001

(j) Communication of hazards to employees (7) Employee information and training. (i) The employer shall train each employee who is exposed to airborne concentrations of asbestos at or above the PEL and/or excursion limit in accordance with the requirements of this section. The employer shall institute a training program and ensure employee participation in the program. (ii) Training shall be provided prior to or at the time of initial assignment and at least annually thereafter.

Acceptable training documentation should include the following:

  • Subject/Topic of the Training

  • Instructor Name (for Safety Meeting/Toolbox Talk) OR Training Company Name (for certificate / refresher)

  • Employee First Name and Last Name

  • Employee Signature (Only required for Safety Meeting/Toolbox Talk)

  • Date

Training documentation can be in the form of a:

  • Certificate - Either issued internally by the employer company or by third party training organization

  • Safety Meeting/Toolbox Talk - Issued internally by the employer company

  • Refresher Training - Either issued internally by the employer company or by third party training organization

NOTE: The worker must be listed on the document as an attendee being trained. If the worker is listed as the trainer or the meeting supervisor, this CANNOT be accepted.

Avetta verifier please click here for additional business rule information

Issue Date = Date of training completion

Expiry Date = 1 year from date of training completion

Â