Competency | Competency Requirements | Upload Requirements | Examples |
---|
| - Name on Licence should match the person registered
- Colour copy required
- Only the front of the licence is required providing it meets all other verification points
- Must be issued by the relevant states Government appointed organisation and the organisation logo must be present
- Must be an Australian state Government issued licence
- Licence number and expiry date must be displayed
- Scanned document to be clearly legible
| - Issue Date to be entered as displayed on licence or enter as yesterdays date
- Expiry to be entered as shown on licence
|
|
Installation & Maintenance of Electrical Equipment in Hazardous Areas | - Name on certificate to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Must be Issued by an RTO with Nationally Recognised Training logo or RTO number
- Competency unit/qualification codes must match exactly
- Completion date or issue date must be displayed
- Black and white or colour is acceptable
- Scanned document to be clearly legible
- Document / Certificate / Number must be displayed
- Accepted Qualification Code - For Certification Business Rules:
- UEEHA0004
- UEEHA0020
- UEEHA0022
- UEEHA0025
- UEEHA0026
- UEEHA0038
- UEECD0011
- UEECO0002
| - Issue Date to be entered as date of training completion
- Expiry to be entered as 3 years from issue date
|
|
Knowledge of the electrical system at Yara Pilbara (Assessment) | - All assessment pages within upload
- Yara Pilbara Training Assessment with matching internal course competency and code (INT019)
- Participant Details to match applicants profile
Note: Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" & "Wil" instead of "William". Note: If the name is not clear or cannot be confirmed the Yara ID number &/or Company Name may be used to verify identity - Applicant's signature and signed date
- Authorised Assessor's complete name and signature and date
- Must show that the person is deemed competent
| - Issue date = Use the date of assessment
|
|
Electrical Isolation Officer Competency Based Assessment (HV Practical) | - All assessment pages within upload
- Yara Pilbara Training Assessment with matching internal course competency and code (INT020)
- Participant Details to match applicants profile
Note: Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" & "Wil" instead of "William". Note: If the name is not clear or cannot be confirmed the Yara ID number &/or Company Name may be used to verify identity
- Applicant's signature and signed date
- Authorised Assessor's complete name and signature and date
- Must show that the person is deemed competent
| - Issue date = Use the date of assessment
|
|
Electrical Isolation Officer Competency Based Assessment (LV Practical) | - All assessment pages within upload
- Yara Pilbara Training Assessment with matching internal course competency and code (INT021)
- Participant Details to match applicants profile
Note: Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" & "Wil" instead of "William". Note: If the name is not clear or cannot be confirmed the Yara ID number &/or Company Name may be used to verify identity - Applicant's signature and signed date
- Authorised Assessor's complete name and signature and date
- Must show that the person is deemed competent
| - Issue date = Use the date of assessment
|
|
HV Isolation Officer (Theory Assessment) | - All assessment pages within upload
- Yara Pilbara Training Assessment with matching internal course competency and code (INT022)
- Participant Details to match applicants profile
Note: Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" & "Wil" instead of "William". Note: If the name is not clear or cannot be confirmed the Yara ID number &/or Company Name may be used to verify identity - Applicant's signature and signed date
- Authorised Assessor's complete name and signature and date
- Must show that the person is deemed competent
| - Issue date = Use the date of assessment
|
|
LV Isolation Officer (Theory Assessment) | - All assessment pages within upload
- Yara Pilbara Training Assessment with matching internal course competency and code (INT023)
- Participant Details to match applicants profile
Note: Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" & "Wil" instead of "William". Note: If the name is not clear or cannot be confirmed the Yara ID number &/or Company Name may be used to verify identity - Applicant's signature and signed date
- Authorised Assessor's complete name and signature and date
- Must show that the person is deemed competent
| - Issue date = Use the date of assessment
|
|
Authority to Operate High Voltage Equipment | - All assessment pages within upload
- Form submitted shall be the Authority to Operate / Isolate Hight Voltage (HV) form [MAINT-E-YP-FRM-310-01]
- Participant Details to match applicants profile.
Note: Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" & "Wil" instead of "William“ Note: if the name is not clear or cannot be confirmed the Yara ID number &/or Company Name or other available details may be used to verify identity - Assessor name, date and signature
- Approver name, date and signature
| - Issue date = Use the date of approval by ‘Approver’
|
|
Electrical Nominee | - Must be a WA Government issued Certificate of Registration for In-House Electrical Installing Work Licence
- Registered with and issued by Electrical Licensing board.
- Applicant's name must match person on certificate (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Licence number to be displayed
- Expiry date to be displayed
- Black and white or colour is acceptable
- Scanned document to be clearly legible
| - Issue Date to be entered as date of training completion
- Expiry date to be recorded as shown on certificate
|
|
High Voltage Switching Certificate | - Name on certificate to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Document must be a Statement of Attainment
- Statement of Attainment in High Voltage Switching
- Competency unit/qualification codes must match exactly
- Must be issued by an RTO with Nationally Recognised Training logo
- Black and white or colour is acceptable
- Scanned document to be clearly legible
| - Issue Date to be entered as date of training completion
- Expiry to be entered as 2 years from issue date
|
|
High Voltage Switching Certificate Refresher | - Name on certificate to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Certificate must indicate completion of 'High Voltage Switching Refresher’
- Must be Issued by an RTO with Nationally Recognised Training logo
- Black and white or colour is acceptable
- Scanned document to be clearly legible
| - Issue Date to be entered as date of training completion
- No Expiry
|
|
Cert IV in Hazardous Areas - Electrical | - Name on certificate to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Course title to be listed on certificate - 'Certificate IV in Hazardous Areas - Electrical'
- Must be Issued by an RTO with Nationally Recognised Training logo
- Competency unit/qualification codes must match exactly
- Black and white or colour is acceptable
- Scanned document to be clearly legible
- Accepted Qualification Code - For Certification Business Rules:
| - Issue Date to be entered as date of training completion
- Expiry to be entered as 3 years from issue date
|
|