Construction Business Rules | Kent | Trade Certification

Competency Name	Competency Requirements	Upload Requirements
Operator Plant.Certificate III.Instrumentation	Name on certificate to match the person registered Electrical and Instrumentation to be listed Other acceptable evidence (but not limited to): Certificate III in Instrumentation UEE31220 Certificate III in Instrumentation and control UEE31211 – Certificate III in Instrumentation and Control Black and white or colour acceptable Must be clearly scanned and legible	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Electrical.Certificate IV.Electrical - Instrumentation	Name on certificate to match the person registered Electrical and Instrumentation to be listed Other acceptable evidence (but not limited to): UEE40411 - Certificate IV in Electrical - Instrumentation UEE40420 - Certificate IV in Electrical - Instrumentation Black and white or colour acceptable Must be clearly scanned and legible	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Welder.Qualification.Weld Test	Name on certificate to match the person registered A completed weld test must be submitted The weld test must be looked over and stamped by head welding supervisor on project. Once stamped and approved, this must be emailed to the relevant site contact to be uploaded to Avetta Must be clearly scanned and legible	Avetta verifier click here for additional business rule information prior to verification of this competency Issue Date = Date of completion / qualification date Expiry Date = As shown on the document
Tradesperson.Certificate of Competency.Certificate of Proficiency / Apprenticeship Certificate of Completion - Fabrication Trade	Name on certificate to match the person registered Certificate of Proficiency / Apprenticeship or Certificate III in Engineering - Fabrication Trade to be submitted MEM31719 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au) can be accepted Must be clearly scanned and legible	Issue Date: Completion date - where listed on certificate (this completion date is always used when displayed) OR; Issue date - If only an issue date is shown on the evidence, enter this as the issue date Expiry Date = None

Competency Name	Business Rule Re-Direction Link
Bricklayer.Certificate III.Bricklaying & Blocklaying	Click here to be redirected to the Pegasus Workforce National Business Rule
Carpenter.Certificate III.Carpentry
Concreter.Certificate III.Concreting
Electrical.Certificate III.Automotive Electrical Technology
Electrical.Certificate III.Electrical Fitting
Electrical.Certificate III.Electrotechnology Electrician
Formwork/Falsework.Certificate III.Formwork/Falsework
Glass & Glazing.Certificate III.Glass & Glazing
Mechanical.Certificate III.Mobile Plant Technology
Mechanical.Tertiary Qualification.Certificate III in Automotive Mechanical Technology
Mechanical.Tertiary Qualification.Certificate III in Heavy Commercial Vehicle Mechanical Technology
Painter and Decorator.Certificate III.General Construction (Painting and Decorating)
Painter and Decorator.Certificate III.Painting and Decorating
Plumber.Certificate III.Plumbing
Steelfixing.Certificate III.
Tradesperson.Certificate III.Arboriculture
Tradesperson.Certificate III.Engineering - Fabrication Trade
Tradesperson.Certificate III.Engineering - Mechanical Trade
Tradesperson.Certificate III.Landscape Construction
Tradesperson.Certificate III.Stonemasonry
Water.Certificate III.Water Industry Operations
Tradesperson.Certificate of Competency.Certificate of Proficiency / Apprenticeship Certificate of Completion - Motor Mechanic
Mechanical.Tertiary Qualification.NSW Fair Trading Motor Mechanic Tradespersons Certificate