Lendlease Business Rules | Inductions

Accredited Service Provider (ASP)

Competency	Competency Requirements	Upload Requirements	Examples
Company.Induction.Accredited Service Provider (ASP) Worker Registration (NSW only)	The applicants name shown on this certificate needs to match the applicants registered name in Onsite The matching competency title needs to be shown	No expiry

Construction Induction Card

Generic Business Rule

Competency	Competency Requirements (Redirection Link)
OH&S-WHS.Induction.OHS Waiver - Internal Employees Only	Pegasus staff click here for additional information for this competency
OH&S-WHS.Induction.Construction ACT	Accepted forms of evidence: OHS Construction Induction card issued by WorkCover / SafeWork / WorkSafe Confirmation letter/form showing evidence of having ordered a replacement card issued by WorkCover / SafeWork / WorkSafe *Note*: This form of evidence will have a number of nominated days on the document as to how long it will take to receive a card. The expiry date is based on the number of nominated days commencing from the issue date of the letter. First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Niko" instead of "Nicholas" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" Only the front of the card is required Black and white or colour copies are acceptable If Date of Birth (DOB) is listed on the supplied evidence, it must match the applicant's DOB in Onsite	Issue date to be recorded in Onsite as reflected on the card or letter Expiry Date = Only required for replacement card order evidence. Input the expiry date thats been listed on the document. If no expiry is detailed on the document, input a 4 week expiry date
OH&S-WHS.Induction.Construction NSW	Accepted forms of evidence: OHS Construction Induction card issued by WorkCover / SafeWork / WorkSafe Confirmation letter/form showing evidence of having ordered a replacement card issued by WorkCover / SafeWork / WorkSafe *Note*: This form of evidence will have a number of nominated days on the document as to how long it will take to receive a card. The expiry date is based on the number of nominated days commencing from the issue date of the letter. Screenshot from NSW Licence Check website showing the following: Applicant name Licence number Current status Start date Licence type: General Construction Induction Training Card First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Niko" instead of "Nicholas" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" Only the front of the card is required Black and white or colour copies are acceptable If Date of Birth (DOB) is listed on the supplied evidence, it must match the applicant's DOB in Onsite	Issue Date = As per card or letter Note: Expiry date only required for replacement card order evidence. Expiry Date = As per letter/form If no expiry listed: input 4 week expiry If interim certificate is provided and it states "This certificate is valid for 60 days from the course date": Calculate and input as expiry date
OH&S-WHS.Induction.Construction NT	Accepted forms of evidence: OHS Construction Induction card issued by WorkCover / SafeWork / WorkSafe Confirmation letter/form showing evidence of having ordered a replacement card issued by WorkCover / SafeWork / WorkSafe *Note*: This form of evidence will have a number of nominated days on the document as to how long it will take to receive a card. The expiry date is based on the number of nominated days commencing from the issue date of the letter. Electronic version issued by state issuer First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Niko" instead of "Nicholas" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" Only the front of the card is required Black and white or colour copies are acceptable If Date of Birth (DOB) is listed on the supplied evidence, it must match the applicant's DOB in Onsite	Issue date to be recorded in Onsite as reflected on the card or letter Expiry Date = Only required for replacement card order evidence. Input the expiry date thats been listed on the document. If no expiry is detailed on the document, input a 4 week expiry date
OH&S-WHS.Induction.Construction QLD	Accepted forms of evidence: OHS Construction Induction card issued by WorkCover / SafeWork / WorkSafe Confirmation letter/form showing evidence of having ordered a replacement card issued by WorkCover / SafeWork / WorkSafe *Note*: This form of evidence will have a number of nominated days on the document as to how long it will take to receive a card. The expiry date is based on the number of nominated days commencing from the issue date of the letter. Electronic version issued by state issuer First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Niko" instead of "Nicholas" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" Only the front of the card is required Black and white or colour copies are acceptable If Date of Birth (DOB) is listed on the supplied evidence, it must match the applicant's DOB in Onsite	Issue date to be recorded in Onsite as reflected on the card or letter Expiry Date = Only required for replacement card order evidence. Input the expiry date thats been listed on the document. If no expiry is detailed on the document, input a 4 week expiry date
OH&S-WHS.Induction.Construction SA	NOTE: All cards issued after 1 July 2011 have photographic ID. Cards issued before that date, without photo ID, remain acceptable. A person in control of a construction site may ask a worker to undertake refresher training if they consider it necessary, in which case a new card and photo ID will be issued by the RTO. Accepted forms of evidence: OHS Construction Induction card issued by WorkCover / SafeWork / WorkSafe Confirmation letter/form showing evidence of having ordered a replacement card issued by WorkCover / SafeWork / WorkSafe *Note*: This form of evidence will have a number of nominated days on the document as to how long it will take to receive a card. The expiry date is based on the number of nominated days commencing from the issue date of the letter. Electronic version issued by state issuer First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Niko" instead of "Nicholas" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" Only the front of the card is required Black and white or colour copies are acceptable If Date of Birth (DOB) is listed on the supplied evidence, it must match the applicant's DOB in Onsite	Issue date to be recorded in Onsite as reflected on the card or letter-Please refer to the note regarding issue dates if issued after 1st July 2011 Expiry Date = Only required for replacement card order evidence. Input the expiry date thats been listed on the document. If no expiry is detailed on the document, input a 4 week expiry date
OH&S-WHS.Induction.Construction TAS	Accepted forms of evidence: OHS Construction Induction card issued by WorkCover / SafeWork / WorkSafe Confirmation letter/form showing evidence of having ordered a replacement card issued by WorkCover / SafeWork / WorkSafe *Note*: This form of evidence will have a number of nominated days on the document as to how long it will take to receive a card. The expiry date is based on the number of nominated days commencing from the issue date of the letter. Electronic version issued by state issuer First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Niko" instead of "Nicholas" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" Only the front of the card is required Black and white or colour copies are acceptable If Date of Birth (DOB) is listed on the supplied evidence, it must match the applicant's DOB in Onsite	Issue date to be recorded in Onsite as reflected on the card or letter Expiry Date = Only required for replacement card order evidence. Input the expiry date thats been listed on the document. If no expiry is detailed on the document, input a 4 week expiry date
OH&S-WHS.Induction.Construction VIC	Accepted forms of evidence: OHS Construction Induction card issued by WorkCover / SafeWork / WorkSafe Note: This card may be a "White Card" or a "Red Card" which is the pre-2008 Victorian construction card and is accepted. Confirmation letter/form showing evidence of having ordered a replacement card issued by WorkCover / SafeWork / WorkSafe *Note*: This form of evidence will have a number of nominated days on the document as to how long it will take to receive a card. The expiry date is based on the number of nominated days commencing from the issue date of the letter. Electronic version issued by state issuer First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Niko" instead of "Nicholas" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" Only the front of the card is required Black and white or colour copies are acceptable If Date of Birth (DOB) is listed on the supplied evidence, it must match the applicant's DOB in Onsite	Issue date to be recorded in Onsite as reflected on the card or letter Expiry Date = Only required for replacement card order evidence. Input the expiry date thats been listed on the document. If no expiry is detailed on the document, input a 4 week expiry date
OH&S-WHS.Induction.Construction WA	Accepted forms of evidence: OHS Construction Induction card issued by WorkCover / SafeWork / WorkSafe Confirmation letter/form showing evidence of having ordered a replacement card issued by WorkCover / SafeWork / WorkSafe *Note*: This form of evidence will have a number of nominated days on the document as to how long it will take to receive a card. The expiry date is based on the number of nominated days commencing from the issue date of the letter. Electronic version issued by state issuer CONSTRUCTION - Safety Awareness Training Card accepted First and last name must match applicant's name in Onsite Shortened versions of first names are accepted, such as: "Chris" instead of "Christopher" "Niko" instead of "Nicholas" Shortened versions of last names are accepted, such as: "Herrera" instead of "Herrera Trujillo" "Mohd" instead of "Raza Hasan Mohd" Only the front of the card is required Black and white or colour copies are acceptable If Date of Birth (DOB) is listed on the supplied evidence, it must match the applicant's DOB in Onsite	Pegasus staff click here Issue date to be recorded in Onsite as reflected on the card or letter Expiry Date = Only required for replacement card order evidence. Input the expiry date thats been listed on the document. If no expiry is detailed on the document, input a 4 week expiry date
OH&S-WHS.Induction.CPCCOHS1001A Work safely in construction industry NOTE: CPCCOHS1001A Work safely in the construction industry was superseded by CPCCWHS1001 Prepare to work safely in the construction industry on the 9 December 2016 meaning EITHER of these codes can be accepted depending on issue date	When statement of Attainment is Uploaded: THIS IS VIEWED AS AN INTERIM CERTIFICATE ONLY RTO Name, National Provider Code / RTO Number & Logo to be displayed on document Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher) completion date or issue date must be displayed Unit of competency listed on certificate to match the nominated unit within Onsite Name and / or signature of issuer Document / Certificate / Statement of Attainment Number Nationally Recognised Training logo	When statement of attainment is uploaded: Document verifier to ensure the Issue of this document is an RTO. Record the Issue date within Onsite: Issue date - If only an issue date is listed please enter this as the issue date EXPIRY REQUIRED - 60 DAYS FROM ISSUE DATE

ONSP Project Specific Business Rule

Competency	Competency Requirements	Upload Requirements
OH&S-WHS.Induction.Work Safely in the Construction Industry	Only Construction Induction cards completed through classroom training are to be accepted. No white cards completed by online training providers will be accepted. Name on card to match the applicants registered name in Onsite OHS Construction Induction to be listed Only the front side of this card is required to be uploaded. To be issued by the relevant / matching state authority:To be issued by the relevant / matching state authority:Workcover/ Safework / Worksafe NSW Black and white or colour copies accepted	Pegasus Staff MUST review the document against additional business rule information prior to verification which is available HERE Date of Completion to be recorded in Onsite as the Issue Date No expiry is required to be entered.
OH&S-WHS.Induction.Construction ACT
OH&S-WHS.Induction.Construction NSW
OH&S-WHS.Induction.Construction NT
OH&S-WHS.Induction.Construction QLD
OH&S-WHS.Induction.Construction SA
OH&S-WHS.Induction.Construction TAS
OH&S-WHS.Induction.Construction VIC
OH&S-WHS.Induction.Construction WA

Code of Conduct

Generic Business Rule

Competency	Competency Requirements	Upload Requirements	Examples
Generic.Induction.Code of Conduct - signed off	The applicants name shown on this paperwork needs to match the applicants registered name in Onsite Employee Conduct to be listed as complete on induction paperwork Paperwork required is certificate of completion evidence issued by Lendlease Either black and white or colour copies of certification is accepted	The issue date in Onsite should be recorded as the date of completion shown on the paperwork The expiry date in Onsite should be recorded as the date which is calculated to be 12 months from the issue date
National.Induction.Lendlease - How We Work at Lendlease (Code Of Conduct)	The applicants name shown on this paperwork needs to match the applicants registered name in Onsite How We Work at Lendlease to be listed as complete on induction paperwork Paperwork required is certificate of completion evidence issued by Lendlease Either black and white or colour copies of certification is accepted	The issue date in Onsite should be recorded as the date of completion shown on the paperwork No expiry date required

Telstra Project

Competency	Competency Requirements	Upload Requirements	Examples
Generic.Induction.Code of Conduct - signed off	The applicants name shown on this paperwork needs to match the applicants registered name in Onsite Employee Conduct to be listed as complete on induction paperwork Paperwork required is certificate of completion evidence issued by Lendlease Either black and white or colour copies of certification is accepted	The issue date in Onsite should be recorded as the date of completion shown on the paperwork The expiry date in Onsite should be recorded as the date which is calculated to be 12 months from the issue date

Criminal Record Checks

Metropolitan Business Rule

Competency

Competency Requirements

Upload Requirements

Examples

Site.Access.CRI Approval

The applicants name shown on this paperwork needs to match the applicants registered name in Onsite
Downloadable template should be complete and uploaded.
A copy of this form is available HERE

Pegasus staff click HERE to check the CRI Approvals Register - Applicant Name on form should match up with an approved applicant line entry on this register

The issue date in Onsite should be recorded as the date of CRI Approval shown on the CRI approvals register
The expiry date in Onsite should be recorded as 12 months from the issue date

Electrical

Competency	Competency Requirements	Upload Requirements	Examples
Electrical.Awareness.Electromagnetic Energy (EME) Awareness (online)	The applicants name shown on this certificate needs to match the applicants registered name in Onsite The matching competency title needs to be shown	Three year expiry

Endeavour

Competency	Competency Requirements	Upload Requirements
Endeavour Energy NAAS ID	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a certificate showing completion of Endeavour Energy NAAS ID	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.Endeavour Energy Safety Rules and Endeavour Electrical Safety Rules (ESR)	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Endeavour Electrical Safety Rules to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date otherwise it is valid for 12 months from issue date
Company.Induction.Endeavour Energy Authorisation	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Endeavour Energy Authorisation to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Hold Access Authority for Work initial training (0001)	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Hold Access Authority for Work initial training (0001) to be listed as complete on induction paperwork "Construct and Maintain OH Mains – Distribution’ Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Hold Low Voltage Access Authority - LVAA	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Hold Low Voltage Access Authority to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Install Type 5 and 6 metering – Class 2D	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Install Type 5 and 6 metering – Class 2D to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Electrical.Statement of Attainment.UETTDRIS56A - Install and Maintain Low Voltage Overhead Services	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Install and Maintain Low Voltage Overhead Services or UETTDRIS56A to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date No Expiry Date required
Company.Induction.EE - Disconnect and Reconnect – Class 2A	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Disconnect and Reconnect – Class 2A to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Hold Access Authority for Work (Personal Issue)	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Hold Access Authority for Work AAW to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Authorisation to Observe Excavation Work Near the Network	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Authorisation to Observe Excavation Work Near the Network to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted Document (letter or card) must be issued by Endeavour Energy, Must be stating the level of authorisation and anniversary date OR Letter or card showing Excavation work near Network	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Authorisation to Carry Out Excavation Work Near the Network	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Authorisation to Excavation Work Near the Network to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Carry out Trade Assistance	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Carry out Trade Assistance to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Carry out trade assistance functions (Ground)	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Carry out trade assistance functions (Ground) to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted Document (letter or card) must be issued by Endeavour Energy, Must be stating the level of authorisation and anniversary date OR Letter or card showing " Carry out electrical testing and inspection (Overhead) Inspect and Accept Electricity Network Assets Construct & Maintain Under Ground Mains - Distribution Construct & Maintain Under Ground Mains - Transmission Construct & Maintain Overhead Mains - Distribution Construct & Maintain Overhead Mains - Transmission Construct & Maintain Overhead Mains - Transmission Tower Construct & Maintain Distribution Substation Equipment and Connection Work Construct, Maintain & Test Secondary Systems Construct, Maintain & Test Primary Substation Equipment Install, Maintain and Test Communications Equipment on or Near the Network (Ground) Install, Maintain and Test Communications Equipment on or Near the Network (Overhead)	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Carry out trade assistance functions (OH)	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Carry out trade assistance functions (OH) to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted Document (letter or card) must be issued by Endeavour Energy, Must be stating the level of authorisation and anniversary date OR Letter or Card showing one of the below Inspect and Accept Electricity Network Assets Construct & Maintain Under Ground Mains - Distribution Construct & Maintain Under Ground Mains - Transmission Construct & Maintain Overhead Mains - Distribution Construct & Maintain Overhead Mains - Transmission Construct & Maintain Overhead Mains - Transmission Tower Construct & Maintain Distribution Substation Equipment and Connection Work Construct, Maintain & Test Secondary Systems Construct, Maintain & Test Primary Substation Equipment Install, Maintain and Test Communications Equipment on or Near the Network (Ground) Install, Maintain and Test Communications Equipment on or Near the Network (Overhead)	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Construct and maintain OH mains - Distribution	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Construct and maintain OH mains - Distribution to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE - Construct and maintain UG mains - Distribution	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite EE - Construct and maintain UG mains - Distribution to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Building & Construction Install and Remove Operational Earth	The applicant's name shown on the Endeavour card or letter needs to match the applicants registered name in Onsite Install and Remove Operational Earth to be listed as complete on card or letter from Endeavour Black and white or colour copies of certification is accepted	Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Company.Induction.EE- Operate to Observe Plant Near Overhead (OH) Electrical Apparatus	Applicants name to be shown on document and match the applicants name registered name in onsite Document (letter or card ) must be issued by Endeavour Energy and must state the Level of authorisation and anniversary date. OR Letter or Card showing one of the below Construct & Maintain Overhead Mains - Distribution Construct & Maintain Overhead Mains - Transmission Construct & Maintain Overhead Mains - Transmission Tower Construct & Maintain Distribution Substation Equipment and Connection Work Construct, Maintain & Test Secondary Systems Construct, Maintain & Test Primary Substation Equipment Install, Maintain and Test Communications Equipment on or Near the Network (Ground) Install, Maintain and Test Communications Equipment on or Near the Network (Overhead)	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Endeavour Authorisation - Schedule 8 Class 2	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Schedule 8 – Class 2A to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Endeavour Authorisation - Schedule 9 (Authorise to Operate or Observe Plant Near Overhead Electrical Apparatus)	Applicants name to be shown on document and match the applicants name registered name in onsite Document (letter or card ) must be issued by Endeavour Energy and must state the Level of authorisation and anniversary date. OR Letter or Card showing one of the below Construct & Maintain Overhead Mains - Distribution Construct & Maintain Overhead Mains - Transmission Construct & Maintain Overhead Mains - Transmission Tower Construct & Maintain Distribution Substation Equipment and Connection Work Construct, Maintain & Test Secondary Systems Construct, Maintain & Test Primary Substation Equipment Install, Maintain and Test Communications Equipment on or Near the Network (Ground) Install, Maintain and Test Communications Equipment on or Near the Network (Overhead) Authorise to Operate or Observe Plant Near Overhead Electrical Apparatus	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date
Endeavour Authorisation - Schedule 10 (Carry Out Trade Assistant Functions (Overhead))	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Carry out trade assistance functions (OH) to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted Document (letter or card) must be issued by Endeavour Energy, Must be stating the level of authorisation and anniversary date OR Letter or Card showing one of the below Inspect and Accept Electricity Network Assets Construct & Maintain Under Ground Mains - Distribution Construct & Maintain Under Ground Mains - Transmission Construct & Maintain Overhead Mains - Distribution Construct & Maintain Overhead Mains - Transmission Construct & Maintain Overhead Mains - Transmission Tower Construct & Maintain Distribution Substation Equipment and Connection Work Construct, Maintain & Test Secondary Systems Construct, Maintain & Test Primary Substation Equipment Install, Maintain and Test Communications Equipment on or Near the Network (Ground) Install, Maintain and Test Communications Equipment on or Near the Network (Overhead)	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date should be recorded as the Anniversary date

Essential Energy

Competency

Competency Requirements

Upload Requirements

Examples

Company.Induction.Essential Energy Safety Rules

The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
Essential Energy Safety Rules to be listed as complete on induction paperwork
Must be issued by Essential Energy or and RTO
Either black and white or colour copies of certification is accepted
No expiry date is required to be recorded for this competency

Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed)
Issue date - If only an issue date is listed please enter this as the issue date

Company.Induction.Essential Energy Authorisation

The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
Essential Energy Authorisation to be listed as complete on induction paperwork
Must be issued by Essential Energy
Either black and white or colour copies of certification is accepted
No expiry date is required to be recorded for this competency

Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed)
Issue date - If only an issue date is listed please enter this as the issue date

Inhouse Training

Competency	Competency Requirements	Upload Requirements
Inhouse.Trained.Cultural Awareness	Name on Attendance List must match the name registered in system Statement of Attendance or Copy of Attendance List	Issue Date = Attendance Date
Inhouse.Course.LLE.Engineering Management Systems	Name on Attendance List must match the name registered in system Statement of Attendance or Copy of Attendance List	Issue Date = Attendance Date
Inhouse.Course.LLE.Introduction to Earthworks	Name on Attendance List must match the name registered in system Statement of Attendance or Copy of Attendance List	Issue Date = Attendance Date
Inhouse.Course.LLE.Lead Auditor Training	Name on Attendance List must match the name registered in system Statement of Attendance or Copy of Attendance List	Issue Date = Attendance Date
Inhouse.Course.LLE.Product Quality Risk Management	Name on Attendance List must match the name registered in system Statement of Attendance or Copy of Attendance List	Issue Date = Attendance Date

Defence Induction

Garden Island

Competency

Competency Requirements

Upload Requirements

Examples

Site.Induction.Garden Island Defence Induction

Name must match the applicants,

Must show completion of the base induction for HMAS Kuttabul

http://www.defence.gov.au/bases/nsw/hmas-kuttabul/

Issue Date = listed on the email

Engage and Influence

Competency

Competency Requirements

Upload Requirements

Examples

OH&S-WHS.Statement of Attendance.LLE - Engage & Influence

Name of document to match name registered in system
Statement of Attendance / Completion
Must contain the name of the Training organisation
Black and white or colour accepted

Issue Date = Attendance Date

GMR Stream Inductions

Generic Business Rule

Competency

Competency Requirements

Upload Requirements

Examples

Site.Induction.Lendlease GMR Passport – Stream 5

or

EH&S Passport for External Partners

This induction is currently hosted by Lendlease and can be found by clicking here

Note: You will be taken to an online learning platform where you will select “register” to create each worker profile (login and password) for individual access to the Lendlease Learning Management System. Once each worker has been added they will receive an email with their details to login and complete each induction.

Helpful Tips: Lendlease recommends using the Google Chrome internet browser to complete this induction. For further information and to download the Lendlease GMR Toolkit for external online learners please click here

TEMPORARY EXEMPTION - NAMES MAY NOT COMPLETELY MATCH WORKERS NAME, PLEASE ACCEPT ANY SHORTENED VERSION OF THE NAME

Stream 5 or higher (Such as Stream 4, Stream 3, Stream 2 or Stream 1) or EH&S Passport for External Partners to be listed as complete on evidence
Either black and white or colour copies of certification is accepted
No expiry date is required to be recorded for this competency
A screenshot of the certificate or email CAN be accepted in lieu of scanned copy of document
Screenshot of GMR training taken via Learning Link can be accepted (See example documents 2 and 3)
NOTE: Acciona GMR training will NOT be accepted for this competency

Pegasus staff CLICK HERE to read additional business rule information prior to file verification

The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork (if shown)

National Induction GMR 4 - Delivery

Competency	Competency Requirements	Upload Requirements	Examples
Site.Induction.GMR 4 Passport	The applicants name shown on this evidence needs to match one of the following formats which aligns to the applicant name in Onsite First name, first initial and last name (with or without space between names) First name and last name in full Shortened first name with exact match on last name Stream 4 or higher (Such as Stream 3, Stream 2 or Stream 1) to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted No expiry date is required to be recorded for this competency A screenshot of the certificate or email CAN be accepted in lieu of scanned copy of document Screenshot of GMR training taken via Learning Link can be accepted Can be accepted towards National Induction GMR 4 - Delivery (Field Workforce) Stream 5 can be accepted if the GMR 4 induction completed down the bottom	Pegasus staff CLICK HERE to read additional business rule information prior to file verification The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork (if shown)

Project / Generic

Competency	Competency Requirements	Upload Requirements
Project.Induction.Sydney Metro Orientation Training	When A Sydney Metro Participant results record sheet (issued by Tafe) is uploaded: Applicants name must be shown on paperwork Black and white or colour copies accepted This can be accepted as evidence of having completion this orientation (despite not clearly stating Sydney Metro Orientation Training) as all attendees who have received this results sheet have already complete the orientation training prior to being issued with this. Course information in the first section of the form must be completed in full (minimum of one trainer/assessor name to be stated) Worker details in second section – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved) Last section of form is to have a trainer name and signature at the bottom of the page If the Tafe issued SOA is uploaded with the specified units on competency then this will also be accepted When a SMOT Daily Attendance Record sheet is uploaded: Applicants name must be shown on paperwork Black and white or colour copies accepted Applicants signature must be shown When a SMOT Statement of Completion is uploaded: Applicants name must be shown on paperwork Will show Laing O'Rourke OR Lendlease and Pegasus Logos Will show 'Project.Induction. Sydney metro Orientation Training Online Induction' as a delivered competency Black and white or colour copies accepted NOTE: LOR SSJ project induction attendance record is not acceptable for this competency. It's for the site induction which is different paperwork to the SMOT induction.	Pegasus Staff CLICK HERE for additional business rule information prior to completing file verification in Onsite Track Easy Photo of the form can be accepted in lieu of actual scanned copy providing all information can still be clearly seen Issue date = Date of completion / end date for training displayed on the induction paperwork Start date can be used as issue date where there is no end date
Generic.Induction.Working In Network Sites	The applicants name shown on this statement of completion needs to match the applicants registered name in Onsite Working in Network Sites to be listed as complete on statement of completion Either black and white or colour copies of certification is accepted No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion shown on the statement of completion
Project.Statement of Attainment.Completed NBN Enable Account OR Identity.-.NBN ID Card	The applicant’s name on enAble evidence needs to match the applicant’s registered name in Onsite Accepted Form/s of Evidence: EnAble card showing BOTH the front & back sides of the card Digital card demonstrating NBN Enable registration EnAble Temporary Card Screenshot of the applicants enAble system profile that confirms the employee's name, enAble ID and the 2x compulsory online trainings are completed - These are: nbn - Health, Safety and Environment (HSE) Awareness Completed: Passed (100%) nbn - Your Role in Connecting Australia Completed: Passed (100%) These screenshots can be taken from their profile by completing either of the below steps: Home page > Accreditation > Online training > View all details or Home page > Accreditation > table under enAble™ card creation	Issue Date: Date of training completion IF SHOWN on the uploaded evidence Expiry Date: No expiry date is required to be recorded for this competency TEMPORARY CARD HAS EXPIRY DATE as an interim certificate please include the date.
Project.Induction.NBN Project Induction (online)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will show completion of: nbn Project Induction OR Worker Induction Questionnaire for Lendlease services business	Issue date = date of training completion Expiry date = no expiry date
NSWTA GRN Site Worker	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) The certificate must state induction – GRN Course doesn’t have to be completed by an RTO Course is an online induction No Expiry date	Issue Date - As listed on the card No Expiry Date
Project.Induction.Optus Project Induction	The applicants name shown on this certificate needs to match the applicants registered name in Onsite The matching competency title needs to be shown Email from Optus is acceptable or the Optus issued card	Issue date = date of training completion Expiry date = no expiry date PLEASE NOTE THAT AN ISSUE & EXPIRY DATE IS NOT A REQUIREMENT. IF THE UPLOADED DOCUMENT HAS THE INFORMATION THEN ADD IT INTO THE SYSTEM. IF NOT PLEASE LEAVE THE SECTION BLANK AND STILL ACCEPT.
Project Induction Optus WHS Induction – Worker (online	Name on card/certificate results to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Email from Optus is acceptable or the Optus issued card	Issue date = date of training completion Expiry date = no expiry date PLEASE NOTE THAT AN ISSUE & EXPIRY DATE IS NOT A REQUIREMENT. IF THE UPLOADED DOCUMENT HAS THE INFORMATION THEN ADD IT INTO THE SYSTEM. IF NOT PLEASE LEAVE THE SECTION BLANK AND STILL ACCEPT.
Project.Induction.Optus Network Access Accreditation	Name on card/certificate results to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Email from Optus is acceptable or the Optus issued card	Issue date = date of training completion Expiry date = no expiry date PLEASE NOTE THAT AN ISSUE & EXPIRY DATE IS NOT A REQUIREMENT. IF THE UPLOADED DOCUMENT HAS THE INFORMATION THEN ADD IT INTO THE SYSTEM. IF NOT PLEASE LEAVE THE SECTION BLANK AND STILL ACCEPT.
Optus ID card	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Email from Optus is acceptable or the Optus issued card	Issue date = date of training completion Expiry date = no expiry date PLEASE NOTE THAT AN ISSUE & EXPIRY DATE IS NOT A REQUIREMENT. IF THE UPLOADED DOCUMENT HAS THE INFORMATION THEN ADD IT INTO THE SYSTEM. IF NOT PLEASE LEAVE THE SECTION BLANK AND STILL ACCEPT.
Optus WHS Induction - Supervisor (online)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be Optus WHS Induction - Supervisor (online)	Issue date = date of training completion Expiry date = no expiry date
Optus Fibre Splicer Level 1	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will show completion of: Optus Fibre Splicer Level 1 Email from OPTUS can be accepted in replace of the certificate. Must have the applicants name and level of what they have completed.	Issue date = date of training completion Expiry date = no expiry date
Optus Fibre Splicer Level 2	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will show completion of: Optus Fibre Splicer Level 2 Email from OPTUS can be accepted in replace of the certificate. Must have the applicants name and level of what they have completed.	Issue date = date of training completion Expiry date = no expiry date
Electrical Trained Avoiding Utility Strikes(NBN EnAble profile)	The applicants name on the enable needs to match the applicants registered name in onsite Evidence to be provided is a screenshot from the individuals enable profile showing 'Avoiding Utility Strikes' marked as Completed: Passed (100%). * This screenshot can be obtained from under "Accreditations' in an individual's enAble profile. 37 - Pathway to Zero - avoiding above and below ground assets strikes under Accreditations is acceptable evidence	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork or online training date listed No expiry date is required to be recorded for this competency
Ausnet Services/Mondo network induction	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will show completion of: Ausnet Services/Mondo network induction	Issue date = date of training completion Expiry date = no expiry date
SAPEN Safety Rules	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will show completion of: SAPEN Safety Rules	Issue date = date of training completion Expiry date = no expiry date
Lendlease – S Group Induction	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Certificate of completion OR training attendance sheet can be accepted Induction Workshop to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Lendlease - S Frontline Leader Induction	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Certificate of completion can be accepted Introduction to leadership at Lendlease to be listed OR Front line leadership induction as complete on induction paperwork Either black and white or colour copies of certification is accepted No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Project.Certificate.Telco EDP Permit Requestor Certificate	The applicants name shown on this paperwork needs to match the applicants registered name in Onsite Either black and white or colour copies of certification is accepted No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Generic.Induction.GMR Passport	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite GMR Passport to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
State Insurance Regulatory Authority (SIRA) RTW Coordinator e-learning program certificate	Applicants name to be displayed on uploaded evidence and to match applicants registered name Completion date or issue date must be displayed No expiry date The date of completion on the evidence should be recorded as the Issue Date in Onsite Training listed on certificate to match the nominated modules below. There are 14 modules that must be completed: How to use this Portal The NSA workers compensation system What employers need to know Understanding the role of the insurer Working with the support team Return to work program Tailoring a return to work program Recover at work planning Developing a recover at work plan Recover at work communication Understanding the claims process Worker entitlements – weekly payments Worker entitlements – other entitlements When things don’t go to plan	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Site.Induction.South East Water Induction and Living Safely Rules Business Rule last updated 07.05.2020	That the name on the induction is the same or shortened version ie Andy for Andrew as the ID name First page of Project Induction Record to be included Box in the checklist at the bottom of Page 1 'SEW Induction & Living Safely Rules' needs to be ticked ‘Inductors Name’ on first page of Project Induction Record to be signed Either Black and white or colour copy of example doc to be accepted. STH-SF0008B - Project Induction Record	Issue date = date of training No expiry date required
Identity.-.SEW Access Card Business Rule last updated 29.05.2020	That the name on the induction is the same or shortened version ie Andy for Andrew as the ID name SEW Access Card - Front Only Must have South East Water or SEW displayed A photo of the person	Issue date = date of training No expiry date required
Site.Induction.Exxon Mobil Induction	Name on ticket/ Training register sheet to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded as the attendance date
Site.Induction.ASIC Card Melbourne Airport	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Induction.VIVA - Part A	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Induction.VIVA -	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Induction.VIVA Newport Induction	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Induction.VIVA Refinery Induction	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Induction.Melbourne Water Induction	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Induction.Air7000 Induction	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Induction.City West Water Contractor Induction	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Induction.CUB Induction	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Induction.Transurban(CityLink) Induction	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Issue date to be recorded
Site.Licence.Defence Pass	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Black and white or colour acceptable Must be clearly scanned and legible	Expiry to be recorded = 31^st of Month/Year on card
Contractor.Induction.Sydney Water Contractor Induction Pass	Name on ticket to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Sydney Water logo to be included Front and back of the card to be provided Authorised representative site to be completed As per the example document checklist at the bottom of form needs to be ticked Sydney Water Certificate is also valid for 1 year from issue date	Issue Date = As listed on the card Expiry Date = As listed on the card or one year from issue date on the certificate.
Site.Induction.Curtin University Contractor Induction	Applicants name must be displayed on the evidence and should match the applicants name as it is entered into Onsite Track Easy (However shortened versions of names such as ‘Chris’ for ‘Christopher’ are accepted) Accepted form/s of evidence: Contractor Induction Card that is issued by Curtin University Curtin University Induction Certificate Black and white OR Colour copy of evidence is acceptable	Issue Date = Date of induction completion Expiry Date = 2 years from the date of induction completion
Site.Induction.SWSLHD Online Induction	Applicants name must be displayed on the evidence and should match the applicants name as it is entered into Onsite Track Easy (However shortened versions of names such as ‘Chris’ for ‘Christopher’ are accepted) Black and white OR Colour copy of evidence is acceptable.	Issue Date = Date of induction completion Expiry Date = 2 years from the date of induction completion

Part A and Part B Inductions

National / Generic Business Rules

Competency

Competency Requirements

Upload Requirements

Examples

National.Induction.Lendlease Orientation - Part A

Generic.Induction.Part A Lendlease Online Induction

This induction is currently hosted by Lendlease and can be found for

Training Links

Lendlease Services by clicking here

Lendlease Building by clicking here

Note: You will be taken to an online learning platform where you will select “register” to create each worker profile (login and password) for individual access to the Lendlease Learning Management System. Once each worker has been added they will receive an email with their details to login and complete each induction.

Helpful Tips: Lendlease recommends using the Google Chrome, Microsoft Edge and Safari internet browser to complete this induction. For further information and to download the Lendlease GMR Toolkit for external online learners please click here

Accepted forms of evidence:

Certificate
Screenshot of online learning platform course completion results
Email

Note: Handwritten inductions are NOT accepted. Must be online induction.

TEMPORARY EXEMPTION - NAMES ON CERTIFICATES WILL NOT BE VERIFIED BY PEGASUS

First and last name must match applicant's name in Onsite
- Shortened versions of first names are accepted, such as:
  - "Chris" instead of "Christopher"
  - "Niko" instead of "Nicholas"
- Shortened versions of last names are accepted, such as:
  - "Herrera" instead of "Herrera Trujillo"
  - "Mohd" instead of "Raza Hasan Mohd"

Must state either:
- Orientation Part A – Building; or
- Orientation Part A – Services; or
- Lendlease construction Australia Part A Induction’

Black and white OR colour copies acceptable

Pegasus Staff MUST review the document against additional business rule information prior to verification which is available here
The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork (if shown)
No Expiry date

Generic. Induction.Lendlease Induction- Part B

The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite
Either black and white or colour copy of example doc to be accepted
Accepted forms of evidence:
- Certificate issued by Lendlease showing completion of 'PART B'
- Worker Induction Questionnaire for Lendlease services business
- STH-SF-1002A - Employee induction record and checklist
No expiry date is required to be recorded for this competency

The issue date in Onsite should be recorded as the date of completion/Todays date as shown on the upload

Civil Delivery Specific Business Rule

Competency	Competency Requirements	Upload Requirements	Examples
Site Induction Part B – Lendlease Civil Delivery	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Either black and white or colour copy of example doc to be accepted Accepted forms of evidence: Certificate issued by Lendlease showing completion of 'PART B' Worker Induction Questionnaire for Lendlease services business STH-SF-1002A - Employee induction record and checklist RNCWB -IN0001 Contractor Project Site Induction (NB Latest version is V10, but accept prior versions No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion of the induction

Part B - Managed Motorways & ITS Maintenance Vic

Competency	Competency Requirements	Upload Requirements	Examples
Site Induction Part B – MMM ITS	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Either black and white or colour copy of example doc to be accepted Accepted forms of evidence: Certificate issued by Lendlease showing completion of 'PART B' Worker Induction Questionnaire for Lendlease services business STH-SF-1002A - Employee induction record and checklist RNCWB -IN0001 Contractor Project Site Induction (NB Latest version is V10, but accept prior versions No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion of the induction

Fixed Network Specific Business Rules

Competency

Competency Requirements

Upload Requirements

Examples

Company.Induction.Laser Safety Awareness Program

Applicants name on evidence must match the applicants name that is registered in the system (however shortened versions of the name such as 'Chris' for 'Christopher' are accepted)
Evidence is internal LL course replacing previous Telstra course - email from HSE representative
Evidence may be provided by an HSE Admin, Training Admin, or other HSE representative

LLS Part B Project Specific Induction Fixed Networks

Applicants name on evidence must match the applicants name that is registered in the system (however shortened versions of the name such as 'Chris' for 'Christopher' are accepted)
Evidence will show completion of "LLS Part B Project Specific Induction Fixed Networks" or Project Induction Record
Any of the below locations can be mentioned and accepted on the Part B certificate:

Customer Connections (face to face)
Nth Connector (face to face)
Wideband (face to face)
Plus ES (face to face)
NBN Projects (face to face)
Operations & Maintenance (face to face)
On Demand Module (face to face)
Optus Colossus (face to face)
NBN ISPC & Telstra ARCW (face to face)
Relocations (face to face)
Wireless

Evidence will be issued by Lendlease
If Project Induction Record Assessment is provided, must list SF-0008B with specific project name, scored and signed by LLS
Another acceptable form of documentation is a screenshot of an email stating (has successfully completed the Network Infrastructure Induction). It must be sent from a Lendlease email, Must have the applicants full name, scoring & Company name.
Please note that there is another form of acceptable evidence for the Fixed Networks - On Demand Module (face to face) Part B. The evidence is a screen shot which shows Telco HSE > Network, it will also have the contractors first, last name & completion date.

NOTE: ANY PART B FIXED NETWORKS CAN BE ACCEPTED FOR THIS COMPETENCY

Issue date = date of training completion
Expiry date = no expiry date

Port River ExpressWay Specific Business Rule

Competency	Competency Requirements	Upload Requirements	Examples
Site Induction Part B – Lendlease Port River Expressway	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Either black and white or colour copy of example doc to be accepted Accepted forms of evidence: Certificate issued by Lendlease showing completion of 'PART B' Worker Induction Questionnaire for Lendlease services business STH-SF-1002A - Employee induction record and checklist RNCWB -IN0001 Contractor Project Site Induction (NB Latest version is V10, but accept prior versions No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion of the induction

Power North Specific Business Rule

Competency

Competency Requirements

Upload Requirements

Examples

Site.Induction.Part B- Power North Site Induction

The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite

Either black and white or colour copy of example doc to be accepted

No expiry date is required to be recorded for this competency

Pegasus Staff MUST review the document against additional business rule information prior to verification which is available HERE

The issue date in Onsite should be recorded as the date of completion/Todays date as shown on the upload

Penlink Specific Business Rule

Competency	Competency Requirements	Upload Requirements	Examples
Site Induction Part B – Lendlease Penlink	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Either black and white or colour copy of example doc to be accepted Accepted forms of evidence: Certificate issued by Lendlease showing completion of 'PART B' Worker Induction Questionnaire for Lendlease services business STH-SF-1002A - Employee induction record and checklist RNCWB -IN0001 Contractor Project Site Induction (NB Latest version is V10, but accept prior versions No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion of the induction

NBN Specific Business Rule

Competency

Competency Requirements

Upload Requirements

Examples

Project.Induction.Part B - Lendlease NBN Site Induction

The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite

Either black and white or colour copy of example doc to be accepted

Accepted Forms of Evidence:

Certificate of completion issued by Lendlease showing 'PART B'

Letter of Authority issued to workers is also proof of Part B completion

Worker Induction Questionnaire for Lendlease services business

The issue date in Onsite should be recorded as the date of completion/Today's date as shown on the upload

No expiry date is required to be recorded for this competency

ONSP Project Specific Business Rule

Competency

Competency Requirements

Upload Requirements

Examples

Lendlease ONSP Combined Part A and B Induction

Existing workers that have already been inducted will be allowed to upload a certificate that states that they have completed the Lendlease Part A and Part B induction on site.

The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite

No expiry date is required to be recorded for this competency

All new workers will be asked to complete the Lendlease Part A Induction online and upload the certificate upon completion

Link – http://onlinelearning.lendlease.com/building_orientation_part_A

The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork

Expiry Date = 3 years from date of completion

RNC Project Specific Business Rule

Competency	Competency Requirements	Upload Requirements	Examples
Site Induction Part B – Lendlease RNC	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Either black and white or colour copy of example doc to be accepted Accepted forms of evidence: Certificate issued by Lendlease showing completion of 'PART B' Worker Induction Questionnaire for Lendlease services business STH-SF-1002A - Employee induction record and checklist RNCWB -IN0001 Contractor Project Site Induction (NB Latest version is V10, but accept prior versions No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion of the induction

RAAF Specific Business Rule

Competency	Competency Requirements	Upload Requirements	Examples
Site.Induction.Part B - RAAF Tindal Redev & KC-30A Facilities Induction	The workers name shown on evidence needs to match the registered name in Onsite Accepted form of evidence will be a photo card showing the Lendlease logo, name, and ID as minimum No expiry date is required to be recorded for this competency	Input issue date as the date of verification

Mates In Construction

Competency	Competency Requirements	Upload Requirements
Building & Construction.Course.Mates In Construction - General Awareness Training	Name on Attendance List must match the name registered in system Statement of Attendance or Copy of Attendance List	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Building & Construction.Course.Mates In Construction - Connector Training	Name on Attendance List must match the name registered in system Statement of Attendance or Copy of Attendance List	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Building & Construction.Course.Mates In Construction - Assist Worker Training	Name on Attendance List must match the name registered in system Statement of Attendance or Copy of Attendance List	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Building & Construction.Course.Mates In Construction - Suicide Alertness	Name on Attendance List or certificate must match the name registered in system Statement of Attendance or Copy of Attendance List	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork

Operator

Competency	Competency Requirements	Upload Requirements
Operator.Induction.AusGrid Electrical Safety Rules NSW Only	The applicants name shown on this induction Card needs to match the applicants registered name in Onsite AusGrid Electrical Safety Rules NSW Only to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Operator.Induction.Endeavour Electrical Safety Rules NSW Only	The applicants name shown on this induction paperwork needs to match the applicants registered name in Onsite Endeavour Electrical Safety Rules NSW Only to be listed as complete on induction paperwork Either black and white or colour copies of certification is accepted No expiry date is required to be recorded for this competency	The issue date in Onsite should be recorded as the date of completion shown on the induction paperwork
Operator.Induction.Energex Network Induction QLD Only	The applicants name shown on this induction paperwork needs to match the applicant’s registered name in Onsite Uploaded Energex Network Induction paperwork needs to display the signatory person’s name & signature as well Either black and white or colour copies of certification is accepted 5 years expiry date is required to be recorded for this competency	5 years expiry date is required to be recorded for this competency
Energex Safety Rules Induction	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Evidence will show completion of Energex Safety Rules Induction Will be issued by Energex	Issue date = date of training completion Expiry date = no expiry date
Energex Authorisation	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded Energex Network Induction paperwork needs to display the signatory person’s name & signature as well Either black and white or colour copies of certification is accepted	Issue date = date of training completion Expiry date = 5 years from the date of completion

·

Security

Metropolitan Remand and Reception Centre Specific Rule

Competency

Competency Requirements

Upload Requirements

Examples

Security.Awareness.Declaration.Contractors

The applicants name shown on this paperwork needs to match the applicants registered name in Onsite

Document needs to be signed and dated by contractor

Can we please add a hyperlink to the downloadable form where it stipulates available HERE

The issue date in Onsite should be recorded as the signed date on the security awareness document

No expiry required

Telstra

Competency	Competency Requirements	Upload Requirements
Site.Access.Card - Telstra Exchange (EAC)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued ID Card showing photo of applicant Both sides of the card should be included in the uploaded file	Record card number in the comments field Issue Date = Not Required Expiry Date = Not Required
Identity.-.Card - Telstra OR Telstra ID card	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued ID Card showing photo of applicant Both sides of the card should be included in the uploaded file	Issue Date = Not Required Expiry Date = Not Required
Project.Induction.Telstra Project Induction (online)	The applicants name shown on this certificate needs to match the applicants registered name in Onsite The certificate will show completion of: LAT104003D Telstra Network Site Induction course The certificate will show the Telstra Logo	Issue Date = Date of completion thats shown on the certificate Expiry Date = 3 years from Issue/Completion Date
Company.Induction.Identify, Locate and Protect Underground Services	RTO Name, National Provider Code / RTO Number & Logo to be displayed on document Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher) Completion date or issue date must be displayed Course title and associated level to be listed on certificate - Identify, locate and protect UG services (RIICCM202) NOTE: Certificate issued from ‘Locating Unlimited’ is also acceptable as long as it states the course dates and the name matches the applicants registered name in Onsite. Document / Certificate / Number Nationally Recognised Training logo No expiry	Record the Issue date within Onsite:
Business Essentials 2019 (0000018730:001)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of the business essentials 2019 course	Issue date = date of training completion Expiry date = no expiry date
Health, Safety and Environment for our people 15019	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Health, Safety and Environment for our people 15019 course	Issue date = date of training completion Expiry date = no expiry date
Emergency Evacuation (0000015017WBT:002, A)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Emergency Evacuation (0000015017WBT:002, A)	Issue date = date of training completion Expiry date = no expiry date
Structural Separation Undertaking - Role Based 2019 (0000018836:001, 1)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Structural Separation Undertaking - Role Based 2019 (0000018836:001, 1)	Issue date = date of training completion Expiry date = no expiry date
Telstra Network Induction - Physical Security (LAT104003D:001, A)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Telstra Network Induction - Physical Security (LAT104003D:001, A)	Issue date = date of training completion Expiry date = no expiry date
Introduction to Wideband Networks (NBN01267A) (OL)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Introduction to Wideband Networks (NBN01267A) (OL)	Issue date = date of training completion Expiry date = no expiry date
Construction Work in Telstra Exchanges (0000017974) (OL)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Construction Work in Telstra Exchanges (0000017974) (OL)	Issue date = date of training completion Expiry date = no expiry date
Project.Induction. Telstra Fundamentals of Optical Fibre Systems (NBN01036) (OL)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Fundamentals of Optical Fibre Systems (NBN01036) (OL)	Issue date = date of training completion Expiry date = no expiry date
Laser Safety - (38003:001, 1) (OL)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Laser Safety - (38003:001, 1) (OL)	Issue date = date of training completion Expiry date = no expiry date
Wideband IP Architecture Overview (MyFuture 38181)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Wideband IP Architecture Overview (MyFuture 38181)	Issue date = date of training completion Expiry date = no expiry date
Wideband Overview (accessed via sharepoint)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Wideband Overview (accessed via sharepoint) I think the reference to Sharepoint is direct from a Telstra document and refers to Telstra Sharepoint - We can delete this, as the worker will have to provide a copy	Issue date = date of training completion Expiry date = no expiry date
Wideband IP Customer Components Overview (MyFuture 38182)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Wideband Overview (accessed via sharepoint) I think the reference to Sharepoint is direct from a Telstra document and refers to Telstra Sharepoint - We can delete this, as the worker will have to provide a copy	Issue date = date of training completion Expiry date = no expiry date
Wideband IP Product and Deployment Overview MyFuture 38183	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Wideband IP Product and Deployment Overview MyFuture 38183	Issue date = date of training completion Expiry date = no expiry date
Wideband EVO Architecture and Components Overview (MyFuture 38581)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Wideband EVO Architecture and Components Overview (MyFuture 38581)	Issue date = date of training completion Expiry date = no expiry date
Wideband EVO Product and Deployment Overview (MyFuture 38583)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Wideband EVO Product and Deployment Overview (MyFuture 38583)	Issue date = date of training completion Expiry date = no expiry date
Wideband Customer Racks	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Wideband Customer Racks	Issue date = date of training completion Expiry date = no expiry date
Wideband Power and earthing	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Wideband Power and earthing	Issue date = date of training completion Expiry date = no expiry date
Wideband IP (Epicentre) and Evo Services for Wideband Construct	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a certificate showing completion of Wideband IP (Epicentre) and Evo Services for Wideband Construct	Issue date = date of training completion Expiry date = no expiry date
Wideband Transport Practitioner Packet Installation and Commissioning	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Uploaded evidence will be a Telstra Issued certificate showing completion of Wideband Transport Practitioner Packet Installation and Commissioning	Issue date = date of training completion Expiry date = no expiry date
Project Induction LAT104003D – Telstra Network – Physical Security	Name on card/certificate results to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Must be completed by an RTO or Lendlease Statement of Attendance / Completion Must contain the name of the Training organisation Black and white or colour accepted	Issue = date of training completion Expiry = No expiry Date

Risk Management

Competency	Competency Requirements	Upload Requirements	Examples
Operator.Certificate.TR-0004B – Risk Management in Lendlease Services - for front line workers	Name on card/certificate results to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted) Must be completed by an RTO or Lendlease Statement of Attendance / Completion Must contain the name of the Training organisation Black and white or colour accepted	Issue = date of training completion Expiry = No expiry date

Worker Induction Records

Worker Induction Record- LLE1002F

Competency

Competency Requirements

Upload Requirements

Examples

Supervisor Statement of Competency- LLE1002F Approval to supervise

The applicants name shown on this paperwork needs to match the applicants registered name in Onsite

LLE1002F to be listed on document

Page 2 to be shown with employee signature details to be completed

The issue date in Onsite should be recorded as the signed date on page 2

No expiry required

Ausgrid

Competency	Competency Requirements	Upload Requirements
Company.Induction.Ausgrid Network Access Procedures	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘Network Access procedures’ as or ‘Apply Access Procedures’ having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature RTO Certificate is accepted. It must show: Apply access procedures to work on or near electrical network infrastructure or code UETTDRRF09 Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry Date one year from Issue/Completion Date
Company.Induction.Ausgrid Contractors Induction	Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) Document must show completion of the External Partners Induction Document must be issued by Ausgrid	Issue date = Date of training completion Expiry date = 3 years from training completion
Company.Induction.Ausgrid Authorisation	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘Ausgrid Authorisation’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature Ausgrid Certificate of Completion is accepted. It must show: Ausgrid Authorisation Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Company.Induction.Ausgrid Environmental Awareness	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘Environmental’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature RTO Certificate is accepted. It must show: Ausgrid Environmental Awareness Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry Date one year from Issue/Completion Date
Company.Induction.Ausgrid Safety Rules	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘Safety Rules’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature RTO Certificate is accepted. It must show: Apply ESI safety rules or code UETTDRRF01 Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry Date one year from Issue/Completion Date
Company.Induction.Ausgrid SC1100 - Working Near Underground Cables	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘Working Near underground Cables’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature Ausgrid Certificate of Completion is accepted. It must show: Working near underground cables Contractors Name Date of completion	No Expiry date required
Company.Induction.Ausgrid - Overhead Earthing & Short Circuiting /Application of OH HV Earth	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘Overhead Earthing & Short Circuiting /Application of OH HV Earth’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature Ausgrid Certificate of Completion is accepted. It must show: Overhead Earthing & Short Circuiting /Application of OH HV Earth Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Company.Induction.Ausgrid - Substation entry	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘Substation entryh’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature Ausgrid Certificate of Completion is accepted. It must show: Substation entry Contractors Name Date of completion Screenshot of Substation entry refreshern is accepted. It must show: Substation entry Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Company.Induction.Ausgrid - Recipient Access Permits	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘ Recipient Access Permits ’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature Ausgrid Certificate of Completion is accepted. It must show: Recipient Access Permits Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry Date one year from Issue/Completion Date
Company.Induction.Ausgrid M1429 - Handling Burnt and Burning CCA Wood Poles Training	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘.Ausgrid M1429 - Handling Burnt and Burning CCA Wood Poles Training’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature Ausgrid Certificate of Completion is accepted. It must show: .Ausgrid M1429 - Handling Burnt and Burning CCA Wood Poles Training Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
Company.Induction.Ausgrid M1425 - Pole inspection & Treatment training	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘Environmental’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature Ausgrid Certificate of Completion is accepted. It must show: Environmental Management and Sustainability Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
SE1000 - Ausgrid Electrical Safety Rules (ESR) and Environmental Induction	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. Cover page will need to be included because it shows: Applicant Name Uploaded document must also include page of passport that shows Ausgrid Electrical Safety Rules (ESR) and Environmental Induction as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature	Issue date = date of training completion Expiry date = no expiry date
Electrical.Induction.SE1000 - Ausgrid Electrical Safety Rules (ESR) and Environmental Induction	Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show: Applicant Name Uploaded document must also include page of passport that shows ‘Electrical Safety Rules (ESR) and Environmental Induction’ as having been achieved with: Ausgrid stamp being shown on this page Date of Training Trainer / Assessor Name Signature Ausgrid Certificate of Completion is accepted. It must show: Electrical Safety Rules (ESR) and Environmental Induction Contractors Name Date of completion RTO Certificate is accepted. It must show: Ausgrid Electrical Safety Rules (ESR) and Environmental Induction Contractors Name Date of completion	Record the Issue date within Onsite: Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry Date one year from Issue/Completion Date
Communications.Qualified.Ausgrid Authorisation - 2C - Overhead Services	Applicants name to be shown on documentation Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted) Card must show 2C – OH Services on front Card must be issued by Ausgrid Back of card not required	Expiry = 12 months expiry

Vesi

Competency	Competency Requirements	Upload Requirements
VESI-OHS0008 VESI Safety Framework - 1 yearly (Ausnet, Powercor, Jamena, United Energy)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Evidence will show completion of VESI-OHS0008 VESI Safety Framework Will be issued by either: Ausnet, Powercor, Jamena or United Energy	Issue date = Date of training completion Expiry date = 1 year from date of training completion
VESI-OHS0008 VESI Safety Framework - 3 yearly (Ausnet, Powercor, Jamena, United Energy)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Evidence will show completion of VESI-OHS0008 VESI Safety Framework - 3 yearly (Ausnet, Powercor, Jamena, United Energy) Will be issued by either: Ausnet, Powercor, Jamena or United Energy	Issue date = Date of training completion Expiry date = 3 years from date of training completion
POW158 - VESI Safety framework	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Evidence will show completion of POW158 - VESI Safety framework Will be issued by either: Ausnet, Powercor, Jamena or United Energy	Issue date = date of training completion Expiry date = no expiry date
VESI Environmental Framework	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Evidence will show completion of VESI Environmental Framework Will be issued by either: Ausnet, Powercor, Jamena or United Energy	Issue date = date of training completion Expiry date = no expiry date
VESI – Safe to Climb	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Evidence will show completion of VESI – Safe to Climb Expiry of 3 years	Issue date = Date of training completion Expiry date = 3 years from date of training completion

Vodafone

Competency	Competency Requirements	Upload Requirements	Examples
Site Induction Vodafone Project Induction (Online)	Applicants name to be displayed on certificate and must match applicant name in Onsite (However shortened versions of first name such as 'Chris' for 'Christopher' can be accepted) Must be issued by Vodafone Show Vodafone Access Network Site Induction Online Training Doesn't need to be completed by a registered training organisation Can be black & white or coloured copy	Issue date = Date of training completion Expiry date = 2 years from date of training completion